Abstract:In this paper, a high-resistivity silicon (HR-Si) interposer integrated with through-silicon via (TSV) electrically grounded coplanar waveguide (CPW) line is presented for 2.5-D/3-D heterogeneous integration of radio frequency (RF) microelectronics devices. In addition, design of TSV interconnection composed of two coaxial ladder-hollow-annular Cu (copper) TSVs of different diameters is utilized to maintain a sufficient freedom for strict standard cleaning to avoid Si resistivity degradation. The formation of the coaxial ladder TSV structure is more beneficial to the subsequent plating process because it reduces the aspect ratio of TSV vias. Hollow-annular Cu TSV is manufactured in order to reduce the problem of mismatch in coefficient of thermal expansion among TSV's constituent materials. A layer of Au (aurum) film is utilized to passivate the exposed Cu surface of Si interposer. Au is widely used in III-V groups' devices because of the good compatibility with photonic integrated circuits, conductivity, and corrosion resistance. HR-Si interposer with TSV grounded CPW line and test structure is fabricated and characterized. With the monitoring test results, it can be found that it changes little in the resistivity of Si substrate, though the whole process, which is a basic requirement for RF performance. RF property test results show that the insertion loss is about -0.20 dB/mm at 10 GHz for the presented TSV grounded CPW line and -0.02 dB per TSV. These test results are better than the traditional design. To verify its applicability to 2.5-D/3-D heterogeneous integration, RF microelectronics die is assembled on TSV interposer and tested, and the test results prove that it works properly.

Design, Fabrication, and Radio Frequency Property Evaluation of a Through-Glass-via Interposer for 2.5D Radio Frequency Integration

A Compact 2-18Ghz Ultra-Wideband Frequency-conversion T/R Module Based on a 3D Heterogeneous Integrated Process

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

A 2.5D Integrated L Band Receiver Based on High Resistivity Si Interposer

Transmission Characteristics Of A Coaxial Through-Silicon Via (C-Tsv) Interconnect

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Process Development of Through-Glass-Via (tgv) Interposer for Radio Frequency (rf) Applications

Design and Fabrication of a TR Microsystem in Ka Band with Si-Based 3D Heterogeneous Integration

Thermal and Electrical Characterization of TSV Interposer Embedded with Microchannel for 2.5D Integration of GaN RF Devices

Design of Compact and Low-Emi Waveguide Structures Based on Through Glass Vias

High-Frequency Electrothermal Characterization of TSV-Based Power Delivery Network

Performance and reliability study of TGV interposer in 3D integration

Double-Shielded Interposer with Highly Doped Layers for High-Speed Signal Propagation

Low-loss Through Silicon Vias (tsvs) and Transmission Lines for 3D Optoelectronic Integration

Design and Experimentally Verification of a Vertical Coaxial Transmission Structure in High resistivity Si Interposer

Directional through Glass Via (TGV) Antennas for Wireless Point-to-Point Interconnects in 3D Integration and Packaging

Process Development of Thick Si Interposer for 2.5d Integration of Rf Mems Devices

Modeling of the RF Coaxial TSV Configuration Inside the Silicon Interposer with Embedded Cooling Cavity

A Novel Compact Thru-Silicon-Via On-Chip Passive Mmw Bandpass Filter for 77ghz Applications

Extracting and Analyzing the S-Parameters of Vertical Interconnection Structures in 3D Glass Packaging

A RF Redundant TSV Interconnection for High Resistance Si Interposer