Abstract:Glass interposer has attracted ever-increasing attention in 2.5D/3D advanced packaging field due to its excellent mechanical performance, thermal stability, easy manufacturing process and low cost. However, the poor adhesion between the glass surface and the deposited metal layer is a severe issue resulting from the smoothness of the glass surface, which limits its widespread applications. Herein, a novel method for realizing the direct copper electroplating on TGV is presented on the basis of a silver nanowire (AgNW) conductive composite. A pre-coat containing resin is firstly applied to the glass substrate as an adhesion layer. The glass substrate, on the other hand, requires only a simple cleaning process. The AgNW is then coated on the resin layer to form the conductive seed layer. Finally, the metallization of the TGV surface is rapidly achieved by direct copper electroplating. For TGVs with a diameter of 100 μm and a thickness of 500 μm, the surface morphology characterization indicates AgNW conductive composite is successfully coated on the TGV surface with a sheet resistance of approx. 39 Ω sq-1, leading to rapid activation of the copper electroplating. The metallographic microscopy proves the asplated copper exhibits excellent coverage and plating uniformity across the TGV at 2 A/dm2 for 40 min. To further evaluate the practical performance of the as-plated copper on glass, the adhesion of the deposited copper is conducted by tape-test technique under ASTM D3359-02. The results show the copper layer has strong adhesion to the glass. Our work provides an efficacious method to directly achieve the metallization of TGV with the advantages of high metal adhesion, simple and cost-effective process. Therefore, this approach has prominent potential for application in 2.5D/3D advanced packaging.

Process Development of Through-Glass-Via (tgv) Interposer for Radio Frequency (rf) Applications

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Design, Fabrication, and Radio Frequency Property Evaluation of a Through-Glass-via Interposer for 2.5D Radio Frequency Integration

Processing Through Glass Via (TGV) Interposers for Advanced Packaging

A New Method of TGVs for Fast Filling of Metal Paste

Performance and reliability study of TGV interposer in 3D integration

Process Development of Thick Si Interposer for 2.5d Integration of Rf Mems Devices

Fabrication Process of A Tsv Interposer for Radio Frequency Chip with Integrated Passive Devices

High Aspect Ratio TGV Fabrication Using Photosensitive Glass Substrate

Fabrication and Characterization of Annular Copper Through-Silicon Via for Passive Interposer Applications

Development of high performance 2.5D packaging using glass interposer with through glass vias

Directly Electroplated Metallization on Through Glass Via (TGV) Using Silver Nanowires Conductive Composite as Seed Layer

Fabrication and Characterization of Fine Pitch TSV Integration with Self-Aligned Backside Insulation Layer Opening.

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

Characterization of a Semiconductor Packaging System utilizing Through Glass Via (TGV) Technology

Implementation of TGVs using nano-glass powder reflow process for leadless packaging

Design of Compact and Low-Emi Waveguide Structures Based on Through Glass Vias

Fabrication and RF Property Evaluation of High-Resistivity Si Interposer for 2.5-D/3-D Heterogeneous Integration of RF Devices

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermomechanically Behaviors of Through Glass Via

Thermal and Electrical Characterization of TSV Interposer Embedded with Microchannel for 2.5D Integration of GaN RF Devices

Fabrication, Characterization, and Simulation of a Low-Cost TSV Integration Without Front-Side CMP Process