Abstract:Glass interposer has attracted ever-increasing attention in 2.5D/3D advanced packaging field due to its excellent mechanical performance, thermal stability, easy manufacturing process and low cost. However, the poor adhesion between the glass surface and the deposited metal layer is a severe issue resulting from the smoothness of the glass surface, which limits its widespread applications. Herein, a novel method for realizing the direct copper electroplating on TGV is presented on the basis of a silver nanowire (AgNW) conductive composite. A pre-coat containing resin is firstly applied to the glass substrate as an adhesion layer. The glass substrate, on the other hand, requires only a simple cleaning process. The AgNW is then coated on the resin layer to form the conductive seed layer. Finally, the metallization of the TGV surface is rapidly achieved by direct copper electroplating. For TGVs with a diameter of 100 μm and a thickness of 500 μm, the surface morphology characterization indicates AgNW conductive composite is successfully coated on the TGV surface with a sheet resistance of approx. 39 Ω sq-1, leading to rapid activation of the copper electroplating. The metallographic microscopy proves the asplated copper exhibits excellent coverage and plating uniformity across the TGV at 2 A/dm2 for 40 min. To further evaluate the practical performance of the as-plated copper on glass, the adhesion of the deposited copper is conducted by tape-test technique under ASTM D3359-02. The results show the copper layer has strong adhesion to the glass. Our work provides an efficacious method to directly achieve the metallization of TGV with the advantages of high metal adhesion, simple and cost-effective process. Therefore, this approach has prominent potential for application in 2.5D/3D advanced packaging.

Implementation of TGVs using nano-glass powder reflow process for leadless packaging

A New Method of TGVs for Fast Filling of Metal Paste

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

Processing Through Glass Via (TGV) Interposers for Advanced Packaging

Directly Electroplated Metallization on Through Glass Via (TGV) Using Silver Nanowires Conductive Composite as Seed Layer

Process Development of Through-Glass-Via (tgv) Interposer for Radio Frequency (rf) Applications

Recent Progress of TGV Technology for High Performance Semiconductor Packaging

Laser Drilling of High-Density Through Glass Vias (TGVs) for 2.5D and 3D Packaging

Characterization of a Semiconductor Packaging System utilizing Through Glass Via (TGV) Technology

Fabrication of Through-glass Vias (TGV) based 3D microstructures in glass substrate by a lithography-free process for MEMS applications

Study of a through-silicon/substrate via filling method based on the combinative effect of capillary action and liquid bridge rupture

Modeling and Characterization of Annealing Effect on the Cu Protrusion and Thermomechanically Behaviors of Through Glass Via

Development of high performance 2.5D packaging using glass interposer with through glass vias

Partially Filled TGV Based on Double Sides Cu Conformal Electroplating Process for MEMS Vacuum Packaging

Fabrication and Filling Quality Optimization of the High Density and Small Size Through Silicon Via Array for Three-Dimensional Packaging

Implementation of Silicon-on-glass MEMS Devices with Embedded Through-Wafer Silicon Vias Using the Glass Reflow Process for Wafer-Level Packaging and 3D Chip Integration

Ultra‐high Aspect Ratio TGV Perforation Utilizing Selective Laser‐induced Etching with Nanochannels

Glass Frit Jetting for Advanced Wafer-Level Hermetic Packaging

Study of the thermo-mechanical behavior of glass interposer for flip chip packaging applications

Design and Fabrication of High Performance Wafer-Level Vacuum Packaging Based on Glass–silicon–glass Bonding Techniques

Research of Vertical via Based on Silicon, Ceramic and Glass