Abstract:A novel three-dimensional (3D) hermetic packaging technique suitable for capacitive microelectromechanical systems (MEMS) sensors is studied. The composite substrate with through silicon via (TSV) is used as the encapsulation cap fabricated by a glass-in-silicon (GIS) reflow process. In particular, the low-resistivity silicon pillars embedded in the glass cap are designed to serve as the electrical feedthrough and the fixed capacitance plate at the same time to simplify the fabrication process and improve the reliability. The fabrication process and the properties of the encapsulation cap were studied systematically. The resistance of the silicon vertical feedthrough was measured to be as low as 263.5 mΩ, indicating a good electrical interconnection property. Furthermore, the surface root-mean-square (RMS) roughnesses of glass and silicon were measured to be 1.12 nm and 0.814 nm, respectively, which were small enough for the final wafer bonding process. Anodic bonding between the encapsulation cap and the silicon wafer with sensing structures was conducted in a vacuum to complete the hermetic encapsulation. The proposed packaging scheme was successfully applied to a capacitive gyroscope. The quality factor of the packaged gyroscope achieved above 220,000, which was at least one order of magnitude larger than that of the unpackaged. The validity of the proposed packaging scheme could be verified. Furthermore, the packaging failure was less than 1%, which demonstrated the feasibility and reliability of the technique for high-performance MEMS vacuum packaging.

Partially Filled TGV Based on Double Sides Cu Conformal Electroplating Process for MEMS Vacuum Packaging

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Modeling and Simulation of Cu Tsv Electroplating for Wafer-Level Mems Vacuum Packaging

Design and Fabrication of High Performance Wafer-Level Vacuum Packaging Based on Glass–silicon–glass Bonding Techniques

A fast and CMP-free TSV process based on wafer-level liquid-metal injection for MEMS packaging

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

Mechanical and Electrical Reliability Assessment of Bump-Less Wafer-on-wafer Integration with One-Time Bottom-Up TSV Filling

A Novel Seedless TSV Process Based on Room Temperature Curing Silver Nanowires ECAs for MEMS Packaging

Low cost metal mini-cap process for suspended mems device packaging (draft)

Fabrication, Characterization, and Simulation of a Low-Cost TSV Integration Without Front-Side CMP Process

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

High Vacuum Packaging of MEMS Devices Containing Heterogeneous Discrete Components

Evaluation and Optimization of Thermo-Mechanical Reliability of a TSV-Based 3D MEMS

Characterization of a Semiconductor Packaging System utilizing Through Glass Via (TGV) Technology

Low Cost Metal Mini-Cap Process for Suspended MEMS Device Packaging

Thermo-Mechanical Reliability of Micro-joints in a RF Packaging with Through Glass Via (TGV) Interposer

A Wafer-level Protective Technique Using Glass Caps for MEMS Gyroscopes

Fabrication, electrical characterization and reliability study of partially electroplated tapered copper through-silicon vias

Processes-based Multistep Simulation of Thermal- mechanical Reliability of a 3D-TSV MEMS

Bonding Packaging Of A Sp4t Rf Mems Switch

Recent Progress of TGV Technology for High Performance Semiconductor Packaging