Abstract:A novel three-dimensional (3D) hermetic packaging technique suitable for capacitive microelectromechanical systems (MEMS) sensors is studied. The composite substrate with through silicon via (TSV) is used as the encapsulation cap fabricated by a glass-in-silicon (GIS) reflow process. In particular, the low-resistivity silicon pillars embedded in the glass cap are designed to serve as the electrical feedthrough and the fixed capacitance plate at the same time to simplify the fabrication process and improve the reliability. The fabrication process and the properties of the encapsulation cap were studied systematically. The resistance of the silicon vertical feedthrough was measured to be as low as 263.5 mΩ, indicating a good electrical interconnection property. Furthermore, the surface root-mean-square (RMS) roughnesses of glass and silicon were measured to be 1.12 nm and 0.814 nm, respectively, which were small enough for the final wafer bonding process. Anodic bonding between the encapsulation cap and the silicon wafer with sensing structures was conducted in a vacuum to complete the hermetic encapsulation. The proposed packaging scheme was successfully applied to a capacitive gyroscope. The quality factor of the packaged gyroscope achieved above 220,000, which was at least one order of magnitude larger than that of the unpackaged. The validity of the proposed packaging scheme could be verified. Furthermore, the packaging failure was less than 1%, which demonstrated the feasibility and reliability of the technique for high-performance MEMS vacuum packaging.

Implementation of Silicon-on-glass MEMS Devices with Embedded Through-Wafer Silicon Vias Using the Glass Reflow Process for Wafer-Level Packaging and 3D Chip Integration

Implementation of three-dimensional SOI-MEMS wafer-level packaging using through-wafer interconnections

Thru-Wafer Interconnect for Soi-Mems 3d Wafer-Level Hermetic Packaging

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

An SOI–MEMS Technology Using Substrate Layer and Bonded Glass As Wafer-Level Package

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

Design and Fabrication of High Performance Wafer-Level Vacuum Packaging Based on Glass–silicon–glass Bonding Techniques

Glass Microprobe With Embedded Silicon Vias For 3d Integration

3-D Integration and Through-Silicon Vias in MEMS and Microsensors

3D integration of micro optical components on flexible transparent substrate with through-hole- vias

Chip Level Packaging for Mems Using Silicon Cap

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

Highly Processable Wtsv Modular Manufacturing for Next Generation 3D MEMS/NEMS Integrated System

A molded surface-micromachining and bulk etching release (MOSBE) fabrication platform on (1 1 1) Si for MOEMS

Through wafer via technology for 3-D packaging

High-temperature adaptive through-silicon via with pyrolyzed carbon via-sealing plates for packaging 3D carbon nanostructure-based devices fabricated using C-MEMS

Integrating The Soi And Poly-Si Surface Structures In A Monolithic Process For Optical Devices Platform

Processing Through Glass Via (TGV) Interposers for Advanced Packaging

A Pseudo 3D Glass Microprobe Array: Glass Microprobe with Embedded Silicon for Alignment and Electrical Interconnection During Assembly

Development of high performance 2.5D packaging using glass interposer with through glass vias