Abstract:A novel three-dimensional (3D) hermetic packaging technique suitable for capacitive microelectromechanical systems (MEMS) sensors is studied. The composite substrate with through silicon via (TSV) is used as the encapsulation cap fabricated by a glass-in-silicon (GIS) reflow process. In particular, the low-resistivity silicon pillars embedded in the glass cap are designed to serve as the electrical feedthrough and the fixed capacitance plate at the same time to simplify the fabrication process and improve the reliability. The fabrication process and the properties of the encapsulation cap were studied systematically. The resistance of the silicon vertical feedthrough was measured to be as low as 263.5 mΩ, indicating a good electrical interconnection property. Furthermore, the surface root-mean-square (RMS) roughnesses of glass and silicon were measured to be 1.12 nm and 0.814 nm, respectively, which were small enough for the final wafer bonding process. Anodic bonding between the encapsulation cap and the silicon wafer with sensing structures was conducted in a vacuum to complete the hermetic encapsulation. The proposed packaging scheme was successfully applied to a capacitive gyroscope. The quality factor of the packaged gyroscope achieved above 220,000, which was at least one order of magnitude larger than that of the unpackaged. The validity of the proposed packaging scheme could be verified. Furthermore, the packaging failure was less than 1%, which demonstrated the feasibility and reliability of the technique for high-performance MEMS vacuum packaging.

High-temperature adaptive through-silicon via with pyrolyzed carbon via-sealing plates for packaging 3D carbon nanostructure-based devices fabricated using C-MEMS

Electrothermal modelling and characterisation of submicron through-silicon carbon nanotube bundle vias for three-dimensional ICs

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Simple through silicon interconnect via fabrication using dry filling of sub-micron Au particles for 3D MEMS

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

A Novel Seedless TSV Process Based on Room Temperature Curing Silver Nanowires ECAs for MEMS Packaging

High Density Through Silicon Via (TSV)

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

Implementation of Silicon-on-glass MEMS Devices with Embedded Through-Wafer Silicon Vias Using the Glass Reflow Process for Wafer-Level Packaging and 3D Chip Integration

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

Highly Processable Wtsv Modular Manufacturing for Next Generation 3D MEMS/NEMS Integrated System

An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined barrier and seed layers

Microfabrication of Through Silicon Vias (TSV) for 3D SiP

Fabrication, electrical characterization and reliability study of partially electroplated tapered copper through-silicon vias

Bottom-Up Cu Filling of High-Aspect-Ratio through-Diamond vias for 3D Integration in Thermal Management

Advanced 3D Through-Si-Via and Solder Bumping Technology: A Review

Design And Realize Of 3d Integration Of A Pressure Sensor System With Through Silicon Via (Tsv) Approach

High density and through wafer copper interconnections and solder bumps for MEMS wafer-level packaging

Structure Design Of Through Silicon Via Interconnects And Growth Of Carbon Nanotubes

Through-silicon via arrays manufactured by photo assisted electrochemical etching and copper electroplating under SC-CO2 environment

Fabrication and Filling Quality Optimization of the High Density and Small Size Through Silicon Via Array for Three-Dimensional Packaging