Abstract:A novel three-dimensional (3D) hermetic packaging technique suitable for capacitive microelectromechanical systems (MEMS) sensors is studied. The composite substrate with through silicon via (TSV) is used as the encapsulation cap fabricated by a glass-in-silicon (GIS) reflow process. In particular, the low-resistivity silicon pillars embedded in the glass cap are designed to serve as the electrical feedthrough and the fixed capacitance plate at the same time to simplify the fabrication process and improve the reliability. The fabrication process and the properties of the encapsulation cap were studied systematically. The resistance of the silicon vertical feedthrough was measured to be as low as 263.5 mΩ, indicating a good electrical interconnection property. Furthermore, the surface root-mean-square (RMS) roughnesses of glass and silicon were measured to be 1.12 nm and 0.814 nm, respectively, which were small enough for the final wafer bonding process. Anodic bonding between the encapsulation cap and the silicon wafer with sensing structures was conducted in a vacuum to complete the hermetic encapsulation. The proposed packaging scheme was successfully applied to a capacitive gyroscope. The quality factor of the packaged gyroscope achieved above 220,000, which was at least one order of magnitude larger than that of the unpackaged. The validity of the proposed packaging scheme could be verified. Furthermore, the packaging failure was less than 1%, which demonstrated the feasibility and reliability of the technique for high-performance MEMS vacuum packaging.

Thru-Wafer Interconnect for Soi-Mems 3d Wafer-Level Hermetic Packaging

Implementation of three-dimensional SOI-MEMS wafer-level packaging using through-wafer interconnections

Implementation of Silicon-on-glass MEMS Devices with Embedded Through-Wafer Silicon Vias Using the Glass Reflow Process for Wafer-Level Packaging and 3D Chip Integration

Through wafer via technology for 3-D packaging

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Research on Wafer-Level MEMS Packaging with Through-Glass Vias

SEMICONDUCTOR PACKAGE STRUCTURE HAVING MICRO-ISOLATION CAVITY

High density and through wafer copper interconnections and solder bumps for MEMS wafer-level packaging

Development & Applications of Through Wafer Interconnect Technology

An SOI–MEMS Technology Using Substrate Layer and Bonded Glass As Wafer-Level Package

3-D Integration and Through-Silicon Vias in MEMS and Microsensors

3-D Integration of MEMS and CMOS Using Electroless Plated Nickel Through-MEMS-Vias

A Novel Wafer Level Package Strategy For Rf Mems

A strategy of wafer-level-plastic-packaging for MEMS based on adhesive bonding

Research on a 3D Encapsulation Technique for Capacitive MEMS Sensors Based on Through Silicon Via

Silicon Micromachining Of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects For 3-D Multichip Packaging

Hermetic Packaging of Mems with Thick Electrodes by Silicon-Glass Anodic Bonding.

Wafer-Level 3D Integration Based on Poly (Diallyl Phthalate) Adhesive Bonding

Highly Processable Wtsv Modular Manufacturing for Next Generation 3D MEMS/NEMS Integrated System

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

Chip Level Packaging for Mems Using Silicon Cap