Abstract:3D system-in-package has recently been considered a major enabler for high density and heterogeneous microsystem integration. We hereby proposed the concept of a unified micromachining and packaging platform based on LTCC (low temperature cofired ceramic) material system and process, which is implemented by first enhancing an existing LTCC hybrid IC fabrication line and then integrating different LTCC micromachining process modules one by one. Hence, the unified process flow can be accomplished within just one single package-test house. The platform has been capable of micromachining basic 3D MEMS (micro electromechanical system) microstructures into LTCC laminates and using them as a packaging substrate for mounting IC/MEMS from other process platforms, realizing self-contained and versatile microsystems of high density. The 3D microstructures formation process consisting of green tape machining, lamination and cofiring are demonstrated. The designing, analysis and fabricated samples of various micro functional structure enabled by the platform are illustrated, including embedded cooling microchannels (capable of lowering substrate temperature by more than 50K), microaccelerometer for harsh environment, micro Pirani gauge for in-situ vacuum level monitoring and THz (tera hertz) vacuum microelectronic devices. Samples of overall packaged MEMS and IC chips with micromachined LTCC substrate are displayed, showing ultra-low leakage (< 5 x 10(-11) Pa . m(3)/s) vacuum packaging capability and significantly enhanced device performance. In addition, the platform has demonstrated the potential of stacking several laminates with mounted chips into a 3D frame-like microsystem. In comparison, 3D integration purely based on Si micromachining, e. g. anodic-bonding based in-situ wafer encapsulation, may only support a very limited spectrum of devices/materials and integration density and is somehow too expensive for many MEMS researchers.

3-D Integration of MEMS and CMOS Using Electroless Plated Nickel Through-MEMS-Vias

3-D Integration and Through-Silicon Vias in MEMS and Microsensors

Heterogeneous Integration of MEMS Sensor Array and CMOS Readout IC with Through Silicon Via Interconnects

Microsystems Using Three-Dimensional Integration and TSV Technologies: Fundamentals and Applications

Three-dimensional integration of suspended single-crystalline silicon MEMS arrays with CMOS

Highly Processable Wtsv Modular Manufacturing for Next Generation 3D MEMS/NEMS Integrated System

Implementation of three-dimensional SOI-MEMS wafer-level packaging using through-wafer interconnections

Novel 3-D Device Fabrication Process in Micro-Electronic Mechanical System Based on Nano-Imprint Lithography

Investigation Of A Unified Ltcc-Based Micromachining And Packaging Platform For High Density/Multifunctional Microsystem Integration

Thru-Wafer Interconnect for Soi-Mems 3d Wafer-Level Hermetic Packaging

Wafer-Level 3D Integration Based on Poly (Diallyl Phthalate) Adhesive Bonding

Fabrication of High‐Density Micro‐Bump Arrays for 3D Integration of MEMS and CMOS

Device and Integration Technologies of III-V/Ge Channel CMOS

Multi-Chip 3D Integrated Micro-System Based on Microwave Multilayer

A Wafer-Level 3d Integration Using Bottom-Up Copper Electroplating And Hybrid Metal-Adhesive Bonding

Development & Applications of Through Wafer Interconnect Technology

Integrating MEMS and ICs

Heterogeneous integration of nano enabling devices for 3D ICs

3D Integration and Thermal Analysis of MEMS Inertial Sensor with Air-Gapped Si-TSV

3-Dimensional integration for interconnect reduction in for nano-CMOS technologies

Three-dimensional integration of plasmonics and nanoelectronics