Abstract:We demonstrated a simple and effective approach to fabricate dense and high aspect ratio sub-50 nm pillars based on phase separation of a polymer blend composed of a cross-linkable polysiloxane and polystyrene (PS). In order to obtain the phase-separated domains with nanoscale size, a liquid prepolymer of cross-linkable polysiloxane was employed as one moiety for increasing the miscibility of the polymer blend. After phase separation via spin-coating, the dispersed domains of liquid polysiloxane with sub-50 nm size could be solidified by UV exposure. The solidified polysiloxane domains took the role of etching mask for formation of high aspect ratio nanopillars by O-2 reactive ion etching (RIE). The aspect ratio of the nanopillars could be further amplified by introduction of a polymer transfer layer underneath the polymer blend film. The effects of spin speeds, the weight ratio of the polysiloxane/PS blend, and the concentration of polysiloxane/PS blend in toluene on the characters of the nanopillars were investigated. The gold-coated nanopillar arrays exhibited a high Raman scattering enhancement factor in the range of 10(8)-10(9) with high uniformity across over the wafer scale sample. A superhydrophobic surface could be realized by coating a self-assembled monolayers (SAM) of fluoroalkyltrichlorosilane on the nanopillar arrays. Sub-50 nm silicon nanowires (SiNWs) with high aspect ratio of about 1000 were achieved by using the nanopillars as etching mask through a metal-assisted chemical etching process. They showed an ultralow reflectance of approximately 0.1% for wavelengths ranging from 200 to 800 nm.

Fabrication of Large-Scale Uniform Submicron Inverted Pyramid Pit Arrays on Silicon Substrates by Laser Interference Lithography

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

A Method to Fabricate a Template with a Long Range Ordered Dense Array of True Nanometer Scale Pits

Large-scale Si<sub>1−<i>x</i></sub>Ge<sub><i>x</i></sub> quantum dot arrays fabricated by templated catalytic etching

Fabrication of large-scale periodic silicon nanopillar arrays for 2D nanomold using modified nanosphere lithography☆

Fabrication and Photoluminescence Study of Large-Area Ordered and Size-Controlled GeSi Multi-quantum-well Nanopillar Arrays

High aspect ratio arrays of Si nano-pillars using displacement Talbot lithography and gas-MacEtch

Competitive Growth of Ge Quantum Dots on a Si Micropillar with Pits for a Precisely Site-Controlled QDs/Microdisk System

Massive Fabrication of Silicon Nanopore Arrays with Tunable Shapes

Fabrication of Ordered Arrays of InP Microstructures by Wet Chemical Etching with Au Masks.

Fabrication of ultrahigh-aspect-ratio and periodic silicon nanopillar arrays using dislocation lithography and deep reactive-ion etching

Ge-Dot/Si Multilayered Structures Through Ni-Induced Lateral Crystallization

Fabrication of Silicon Nanopore Arrays Using A Combination of Dry and Wet Etching

Fabrication of Large-Area Silicon Spherical Microlens Arrays by Thermal Reflow and ICP Etching

Electrochemically Etched Pore Array in Silicon with Large Spacing and High-Aspect-ratio

Fabricating 3D Si nanostructure via a novel Ga+ implantation enabled maskless dry etching process

Fabrication Of Inverted-Pyramid Silicon Nanopore Arrays With Three-Step Wet Etching

Fabrication of sub-50 nm nanochannel array by an angle forming lift-off method

Facile Synthesis of Silicon Micropillar Arrays Using Extreme Ultraviolet Lithography and Ag-Assisted Chemical Etching Method

Fabrication of Silicon Hierarchical Nanopillar Arrays Based on Nanosphere Lithography

Wafer Scale Fabrication of Dense and High Aspect Ratio Sub-50 Nm Nanopillars from Phase Separation of Cross-Linkable Polysiloxane/Polystyrene Blend