Abstract:Nanostructures with sufficiently large areas are necessary for the development of practical devices. Current efforts to fabricate large-area nanostructures using step-and-repeat nanoimprint lithography, however, result in either wide seams or low efficiency due to ultraviolet light leakage and the overflow of imprint resin. In this study, we propose an efficient method for large-area nanostructure fabrication using step-and-repeat nanoimprint lithography with a composite mold. The composite mold consists of a quartz support layer, a soft polydimethylsiloxane buffer layer, and multiple intermediate polymer stamps arranged in a cross pattern. The distance between the adjacent stamp pattern areas is equal to the width of the pattern area. This design combines the high imprinting precision of hard molds with the uniform large-area imprinting offered by soft molds. In this experiment, we utilized a composite mold consisting of three sub-molds combined with a cross-nanoimprint strategy to create large-area nanostructures measuring 5 mm × 30 mm on a silicon substrate, with the minimum linewidth of the structure being 100 nm. Compared with traditional step-and-flash nanoimprint lithography, the present method enhances manufacturing efficiency and generates large-area patterns with seam errors only at the micron level. This research could help advance micro-nano optics, flexible electronics, optical communication, and biomedicine studies.

Fabrication of sub-50 nm nanochannel array by an angle forming lift-off method

Simple and Cost-Effective Fabrication of Two-Dimensional Plastic Nanochannels from Silica Nanowire Templates

Fabrication of 2D silicon nano-mold by side etch lift-off method

Microfabrication Assisted by Laser-Trapped Microparticle Tools

Fabrication of Large-Area Nanostructures Using Cross-Nanoimprint Strategy

Integrated fabrication of micro/nano-fluidic chip based on nano-imprint lithography and bonding

Scanning probe lithography for nanoimprinting mould fabrication

Wafer-scale Fabrication of High-Aspect Ratio Nanochannels Based on Edge-Lithography Technique.

Fabrication of 1-d nanochannels on PMMA substrate by photoresist-free uv lithography and UV-assisted bonding under low temperature

Fabrication of Nanoimprint Mold by Multilayer Film Deposition Technique

Nanoimprint lithography technology

A facile nanowire fabrication approach based on edge lithography

Wafer-Scale Fabrication of V-Shaped Silicon Nano-Slit Arrays

Versatile Approach of Silicon Nanofabrication without Resists: Helium Ion-Bombardment Enhanced Etching

Fabrication of High Aspect Ratio Nano-Channels by Thermal Nano-Imprinting and Parylene Deposition

Massive Fabrication of Silicon Nanopore Arrays with Tunable Shapes

A new low-cost fabrication method of SU-8 micro–nano channels and needle tip in electro-hydrodynamic jet chips

Glass etching to bridge micro- and nanofluidics.

Achieving a sub-10 nm nanopore array in silicon by metal-assisted chemical etching and machine learning

Micro-print and nano-imprint methods combining laser-drilled screen printing and ultraviolet nanoimprint lithography: a review

Fabrication of ultrahigh-aspect-ratio and periodic silicon nanopillar arrays using dislocation lithography and deep reactive-ion etching