Abstract:Ellipsoidal head is a common end closure of pressure vessel. Plastic collapse is a crucial failure mode considered in the design of ellipsoidal head subjected to internal pressure. Internally pressurized ellipsoidal head tends to be hemisphere (geometric strengthening) due to the effect of material hardening before plastic collapse occurs, which enhances load carrying capacity of ellipsoidal head. However, in the current pressure vessel codes such as ASME BPVC.VIII.1 and BPVC.VIII.2, EN 13445-3, and Chinese codes GB/T 150.3 and JB 4732, design methods based on linear elastic or perfectly-plastic theory are used to prevent plastic collapse of ellipsoidal head, leading to conservative design. Therefore, we developed a new method for preventing plastic collapse of ellipsoidal head under internal pressure, considering the effects of material hardening and geometric strengthening. The new method was developed on basis of our previous extensive work on finite element analysis and experiments for plastic collapse of internally pressurized ellipsoidal heads. The new method provides sufficient margin of safety by checking against the experimental bursting results of full-scale ellipsoidal heads with various geometries, various material types and various manufacturing methods. Compared with the design methods in the current pressure vessel codes, the new method shows an advantage of economy. This new method had been approved by China Standardization Committee on Boilers and Pressure Vessels, and at present it has been introduced into the Chinese pressure vessel code.

The Method of Design by Analysis for Cylindrical Pressure Vessels with Spherically Dished Head

Comparison of design methods for internally pressurized ellipsoidal head

Discussion on Thickness Formula of Cylindrical Shell under Internal Pressure

An Analytical Method for Cylindrical Shells with Nozzles Due to Internal Pressure and External Loads-Part Ii: Design Method

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

A Stress Analysis Method for Cylindrical Shells With Nozzles Subjected to Internal Pressure, External Forces and Moments

A Universal Design Method Based on Analysis for Cylindrical Shells with Nozzles Due to Internal Pressure, External Forces and Moments: Part II

Advances in "design by Analysis" Methods for Pressure Vessels

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Simplified theoretical solution and practical calculation method for welded hollow spherical joints of rectangular hollow section members

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Plastic Analysis Methods for Design by Analysis of Pressure Vessels

The Analysis Methods of Reinforcements for Openings in Cylindrical Vessels in GB 150—2011

Assessment of DBA-L Pressure Vessel Design Method by a Cylindrical Vessel with Hemispherical Ends

A Thin Shell Theoretical Solution for Two Intersecting Cylindrical Shells Due to External Branch Pipe Moments

A New Method for Preventing Plastic Collapse of Ellipsoidal Head under Internal Pressure

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Local Stress Analysis of Cylindrical Shells due to Branch Pipe Moments

A New Pressure Vessel Design by Analysis Method Avoiding Stress Categorization

Plastic Limit Load Analysis of Pressure Pipes Containing Incomplete Welding Defects under Combined Loadings