Abstract:Abstract The design of obround components has been difficult and complex due to the absence of a suitable theoretical solution. Current design codes use empirical formulas based on assumptions to determine the minimum required thickness for obround components. The design process involves iteration. The results obtained are far from accurate. In the paper, a new design method for obround components is proposed based on the recently proposed closed-form solution. In the new method, an obround shell is imagined as being stretched laterally from a cylindrical shell or parent cylinder. With the flattened shell increases, the thickness of the obround shell should increase accordingly, to keep the maximum hoop stress of obround shell consistent with the maximum hoop stress of the parent cylinder. The minimum requested thickness, MRT, of the obround shell are related to the MRT of the parent cylinder and the flattened shell length of the obround shell. Through parameter studies, those relationships are investigated. Empirical expressions are used to describe those relationships. Using the proposed design method, the determination of the MRT of obround members becomes the determination of the MRT of the parent cylinders and additional parameters. The MRT of obround members is determined directly. The case study demonstrates that the proposed method is an efficient and accurate design process for obround members. The use of new method for Fitness-for-service is explored. The new method can be used to reassess operational safety in the event of vessel materials deterioration.

A Universal Design Method Based on Analysis for Cylindrical Shells with Nozzles Due to Internal Pressure, External Forces and Moments: Part II

An Analytical Method for Cylindrical Shells with Nozzles Due to Internal Pressure and External Loads-Part Ii: Design Method

Limit pressure and design criterion of cylindrical pressure vessels with nozzles

Mechanical Analysis and Optimal Design for Carbon Fiber Resin Composite Wound Hydrogen Storage Vessel With Aluminum Alloy Liner

Discussion on Thickness Formula of Cylindrical Shell under Internal Pressure

The Method of Design by Analysis for Cylindrical Pressure Vessels with Spherically Dished Head

Analytical Study on the Buckling of Cylindrical Shells with Stepwise Variable Thickness Subjected to Uniform External Pressure

Mechanical Analysis and Reasonable Design for Ti-Al Alloy Liner Wound with Carbon Fiber Resin Composite High Pressure Vessel

A Semi-Analytical Method for the Dynamic Analysis of Cylindrical Shells with Arbitrary Boundaries

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Localized Perturbation Load Approach for Buckling Design of Thin-Walled Steel Cylindrical Shells under Partial Axial Compression

Design of Axially Loaded Isotropic Cylindrical Shells Using Multiple Perturbation Load Approach – Simulation and Validation

A New Design Method For Axially Loaded Thin-Walled Cylindrical Shells Based On Elasto-Plastic Buckling Analysis

Finite Element Analysis of Tangential Rectangle Joint Pipe on the Shell of an Cyclone

Dynamic Buckling of Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation under Time Dependent External Pressure

A New Design Method for Obround Shells

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

Numerical Simulation Analysis on Buckling Load of Large Combined Cylindrical Shells

Plastic Limit Load Analysis for Pressure Pipe with Incomplete Welding Defects Based on the Extended Net Section Collapse Criteria

Advances in "design by Analysis" Methods for Pressure Vessels

A Three-Dimensional Analytical Solution for Sandwich Pipe Systems under Linearly Varying External Pressures