Abstract:The holding voltage of electrostatic discharge (ESD) protecting structure is the critical parameter to determine the latch-up performance of the protecting device, but the thermal change of ESD device parameters lead the protecting device to suffer latch-up risk at high ambient temperature. In this paper, the holding characteristics of the ESD protecting device at various ambient temperatures ranging from 30 ℃ to 195 ℃ are studied. The investigated ESD structure is the N-channel metal oxide semiconductor (NMOS) transistors fabricated with the 0.18 μm partially depleted silicon-on-insulator process. The ESD characteristics of the device are measured by the transmission line pulse test system at different ambient temperatures. The test results show that the holding voltage (VH) decreases with temperature increasing. The TCAD simulation is carried out to support and analyze the experimental results, and the same trend of VH versus temperature is obtained. Through the analysis of simulation results and theoretical derivation, the underlying physical mechanisms related to the effects of temperature on VH and holding current (IH) are discussed in detail. When the drain is subjected to the same current pulsing and the Source and Body are both grounded, the distributions of current density, electric potential, and injected electron density of NMOS at various temperatures are extracted and analyzed. When the Drain, Source, and Body are all grounded, the distributions of the electrostatic field at various temperatures are extracted and analyzed. The distribution of electric potential in NMOS indicates that the voltage drop on the Drain-Body junction (VDB) is affected by ambient temperature significantly, and the variation of VDB dominates the variation trend of VH with temperature increasing. The reducing electrostatic field and increasing injected electron density with temperature decreasing contribute to the decreasing of VDB. The trend of IH and parasitic Body resistance (RBody) weakens the temperature dependence of the VH. The current gain of parasitic bipolar transistor (β) decreases with ambient temperature rising, which is the main contributor to the decreasing of IH. Therefore, increasing IH and RBody is helpful in reducing the temperature dependence of the latch-immune ESD protection structure.

Temperature Dependence of Diode and Ggnmos ESD Protection Structures in 28nm CMOS

Analysis of 65 Nm Technology Grounded-Gate NMOS for On-Chip ESD Protection Applications

Ggnmos As Esd Protection in Different Nanometer Cmos Process

Effects of Finger Width and Metal Routing of GGNMOS on ESD Protection

Implementation Of Temperature Dependent Contact Resistance Model For The Analysis Of Deep Submicron Devices Under Esd

Characterization and Analysis of Diode-String ESD Protection in 28nm CMOS by VFTLP

Temperature Dependence of ESD Effects on 28 Nm FD-SOI MOSFETs

Effects of process variation on turn-on voltages of a multi-finger gate-coupled NMOS ESD protection device

Study of Drain-Extended Nmos under Electrostatic Discharge Stress in 28 Nm and 40 Nm Cmos Process

Evaluation of RF electrostatic discharge (ESD) protection in 0.18-μm CMOS technology

ESD Protection of NMOS Device at Different Gate Bias

A Novel Substrate-Optimized GGNMOS for Low-Voltage ESD Protection in 65 nm CMOS Process

An Overview of ESD Protection in Nanometer IC

Effect of poly-silicon gate on ESD protection performance of LDMOS-SCR devices

Improvement on Diode String Structure for 65-Nm RF ESD Protection

Effect of High-Temperature on Holding Characteristics in MOSFET ESD Protecting Device

Investigation of Esd Protection Strategy in High Voltage Bipolar-Cmos-Dmos Process

ESD Circuits Design for High-Speed Analog CMOS Integrated Circuits

Comparative Study of Reliability Degradation Behaviors of LDMOS and LDMOS-SCR ESD Protection Devices

FOD Based ESD Protection Devices in Deep Sub-micron Technology

On the ESD Protection and Non-Fatal ESD Strike on Nano CMOS Devices