Abstract:The preparation of YBCO superconducting films by using metal organic chemical deposition (MOD) involves low-temperature pyrolysis and high-temperature treatment. The former process generally requires the introduction of water vapor and other gases. The study on pyrolysis in a low vacuum environment and non-carrier gas atmosphere has never been reported. In this work, we explored a low vacuum pyrolysis scheme with simple Argon gas decompression and a carrier-free atmosphere. The effects of heating rate on the microstructure of pyrolysis films were investigated, and the high-temperature treatment temperature (Th) was also optimized. Compared with conventional pyrolysis, the present low-vacuum pyrolysis does not employ the flowing dry or wet gases, facilitating the internal gas release during film decomposition. More importantly, the efficiency was greatly improved with reduced pyrolysis time. The obtained film surface is free of CuO particle, which leads to a lower roughness. We also investigated the effect of Th on the final YBCO film texture and superconductivity. As Th increased from 810 °C to 815 °C, the BaCuO2 phase decreased with enhanced c-axis orientation being evident by XRD and Raman spectra. As a result, the critical current density (Jc) increased from 0.38 MA/cm2 to 1.2 MA/cm2 (77 K, self-field).

Pyrolysis Induced Surface Morphology Evolution of YBa2Cu3O7-δ Films Prepared by Low-Fluorine Metal-Organic Deposition

Research of YBa2Cu3O7-δPyrolysis Films with Different Surface Morphologies by Low-Fluorine Metallorganic Deposition

Deposition of Y2O3 stabilized ZrO2 thin films from Zr(DPM)4 and Y(DPM)3 by aerosol-assisted MOCVD

Fabrication and Characterization of Y2O3 Stabilized ZrO2 Films Deposited with Aerosol-Assisted MOCVD

MOD-Derived YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> Thin Films using a Fast Pyrolysis Process

Direct Observation of Wrinkling and Healing Evolution for YBa2Cu3O 7−δ Precursor Films Prepared by the Metalorganic Solution Method

Mod-derived YBa2Cu3O7-δ thin filmsusing a fast pyrolysis process

Synthesis of YSZ film by solid single source PE-MOCVD method and characterization

Preparation of YBa2Cu3O7−δ Films by MOD Method Using Trifluoroacetate As Precursor

Surface Morphology and Profile Analysis for Five-Layer YBa 2 Cu 3 O 7− Δ Thick Films Prepared by Low-Fluorine Metallorganic Deposition

Controlled-Growth of $\hbox{YBa}_{2}\hbox{Cu}_{3}\hbox{O}_{7-\delta} $ Film Using Modified Low-Fluorine Chemical Solution Deposition

Low-Vacuum Pyrolysis of YBCO Films by Using Fluorine-Free Metal Organic Chemical Deposition

The effects of heating and annealing processes on the surface morphology and quality of double-sided YBa 2 Cu 3 O 7−δ thin films

Controlled-Growth of Yba2cu3o7-Delta Film Using Modified Low-Fluorine Chemical Solution Deposition

Microstructures of YBa1.85Eu0.15Cu3O7− Superconducting Films Grown on SrTiO3 and YSZ Substrates

Rapid Pyrolysis of SmBa2Cu3O7-δ Films in CSD-MOD Using Extremely-Low-Fluorine Solutions

Crystallization Characteristics of YBa2Cu3O7−δ Film During TFA-MOD

A Rapid Process of YBa2Cu3O7−δthin Film Fabrication Using Trifluoroacetate Metal–organic Deposition with Polyethylene Glycol Additive

Crystallization Characteristics Of Yba2cu3o7-Delta Film During Tfa-Mod

Artificial Control for Nucleation and Growth Rate of YBa2Cu3O7-δ Coated Conductors Prepared by Low Fluorine Chemical Solution Deposition

In situ high temperature optical microscopy study of phase evolution in YBa 2 Cu 3 O 7 d films prepared by a fluorine-free sol – gel route