Abstract:LaMnO3-delta (LMO) films with different oxygen contents are deposited on Epi-MgO/IBAD-MgO templates using reactive magnetron sputtering under varying temperatures and atmospheres. Subsequent YBa2Cu3O7-delta (YBCO) films are grown on LMO layers by metal-organic deposition (MOD) method. X-ray diffraction measurements reveal that YBCO texture cannot be further improved when the full width at half maximum (FWHM) values of LMO (011) phi-scans (evaluation on in-plane alignment) and LMO (002) omega-scans (evaluation on out-of-plane alignment) for LMO films are less than 8 degrees and 4 degrees, respectively. Sharp orientation with in-plane FWHM value of <3 degrees for YBCO (103) phi-scan and out-of-plane FWHM value of <1.5 degrees for YBCO (006) omega-scan can typically be achieved in YBCO films. Precise control of growth conditions, especially atmosphere, remains a feasible way to modify the surface of LMO films. It induces changes in oxygen content, lattice structure and surface morphology of LMO, and further affects the epitaxial growth of superconducting layers. Oxygen-deficient LMO with expanded lattice parameters and flat surface can effectively suppress the non-c-axis oriented YBCO, thereby enhancing the current carrying capability. The 500 m long YBCO coated conductors with conditioned LMO layers have an inductive critical current (I-c) ranging from 358 to 437 A/12 mm width with an average value of 398 A/12 mm width.

Surface Morphology and Profile Analysis for Five-Layer YBa 2 Cu 3 O 7− Δ Thick Films Prepared by Low-Fluorine Metallorganic Deposition

Influence of Annealing Time on 5-Layer YBa2Cu3O7-δ Thick Films by Low-Fluorine Metal-Organic Deposition

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Fabrication and Analysis of Tri-layer YBaCu Thick Films by Low-Fluorine MOD Method

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Preparation of YBa2Cu3O7−δ Films by MOD Method Using Trifluoroacetate As Precursor

Mod-derived YBa2Cu3O7-δ thin filmsusing a fast pyrolysis process

MOD-Derived YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> Thin Films using a Fast Pyrolysis Process

Controlled-Growth of $\hbox{YBa}_{2}\hbox{Cu}_{3}\hbox{O}_{7-\delta} $ Film Using Modified Low-Fluorine Chemical Solution Deposition

Enhancing superconductivity of ultrathin YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> films by capping non-superconducting oxides*

Enhancing Superconductivity of Ultrathin YBa2Cu3O7-δ Films by Capping Non-Superconducting Oxides*

Controlled-Growth of Yba2cu3o7-Delta Film Using Modified Low-Fluorine Chemical Solution Deposition

MOD multi-layer YBCO films on single-crystal substrate

Low-Vacuum Pyrolysis of YBCO Films by Using Fluorine-Free Metal Organic Chemical Deposition

Research of YBa2Cu3O7-δPyrolysis Films with Different Surface Morphologies by Low-Fluorine Metallorganic Deposition

Formation and Characterization of YBa2Cu3O7−δ High-Tc Thin Films by MOCVD with Single Mixed Precursor

Effects of BaCO3 in transient liquid-assisted fluorine-free metal organic deposition on the growth process of YBCO

Preparation of YBCO superconducting thick films On MgO substrates by modified melt growth process

Chemical Solution Derived YBa2Cu3.3O7-δ/Y2O3(CuO) Multilayers on Oxide Buffered Metallic Tapes

Crucial role of oxygen-deficient LaMnO3-delta cap buffer layer in enhancement of current carrying capability of MOD-YBCO coated conductors