Abstract:Abstract Silicon interposers embedded with ultra-deep through-silicon vias (TSVs) are in great demand for the heterogeneous integration and packaging of opto-electronic chiplets and microelectromechanical systems (MEMS) devices. Considering the cost-effective and reliable manufacturing of ultra-deep TSVs, the formation of continuous barrier and seed layers remains a crucial challenge to solve. Herein, we present a novel dual catalysis-based electroless plating (ELP) technique by tailoring polyimide (PI) liner surfaces to fabricate dense combined Ni barrier/seed layers in ultra-deep TSVs. In additional to the conventional acid catalysis procedure, a prior catalytic step in an alkaline environment is proposed to hydrolyze the PI surface into a polyamide acid (PAA) interfacial layer, resulting in additional catalysts and the formation of a dense Ni layer that can function as both a barrier layer and a seed layer, particularly at the bottom of the deep TSV. TSVs with depths larger than 500 μm and no voids are successfully fabricated in this study. The fabrication process involves low costs and temperatures. For a fabricated 530-μm-deep TSV with a diameter of 70 μm, the measured depletion capacitance and leakage current are approximately 1.3 pF and 1.7 pA at 20 V, respectively, indicating good electrical properties. The proposed fabrication strategy can provide a cost-effective and feasible solution to the challenge of manufacturing ultra-deep TSVs for modern 3D heterogeneous integration and packaging applications.

A Wet Process to Fabricate Silicon Oxide Layer for Through-Silicon-via Insulator Application

A New Low-Cost Approach to Fabricate Silicon Dioxide for Insulator of Through-Silicon-Via

A Wet Process to Form Silicon Oxide Thin Layer for Through Silicon Via Application

Pretreatment to Assure the Copper Filling in Through-Silicon Vias

A New Method to Fabricate Sidewall Insulation of TSV Using a Parylene Protection Layer

Covalently Formation of Insulation and Barrier Layers in High Aspect Ratio TSVs

Research of an integrated fabrication process of barrier layer and seed layer used in through silicon via

A wet process to etch arrayed vias for through silicon via application of 3D packaging

Microfabrication of Through Silicon Vias (TSV) for 3D SiP

Tungsten Through-Silicon Via Technology for Three-Dimensional LSIs

Electroless Grafting of Polymer Insulation Layers in Through-Silicon Vias

An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined barrier and seed layers

A Low Temperature Silicon‐on‐Insulator Fabrication Process Using Si MBE on Double‐Layer Porous Silicon

Optimization of innovative approaches to the shortening of filling times in 3D integrated through-silicon vias (TSVs)

Through-silicon via arrays manufactured by photo assisted electrochemical etching and copper electroplating under SC-CO2 environment

Copper electroplating technique for efficient manufacturing of low-cost silicon interposers

Fabrication and Characterization of Fine Pitch TSV Integration with Self-Aligned Backside Insulation Layer Opening.

Completely Filling of Through-Silicon-Vias with High Aspect Ratio by High Cavity Physical Vapor Deposition and Electroplating

Wafer Scale Insulation of High Aspect Ratio Through-Silicon Vias by iCVD

Design and analysis of an I-shaped TSV structure for 3D SiP

Silicon Vertical Interconnect Technology of Low Cost