Abstract:TiAl alloys are ideal high-temperature structural materials for aerospace applications. However, their ductility, bending strength and machinability are poor at room temperature, thus severely limiting their practical application. In this study, carbon nanotubes (CNTs) were used as additives, and Ti–48Al–2Cr–8Nb was used as the original powder to prepare CNTs/TiAl alloys by employing spark plasma sintering. The effects of different CNT contents on the microstructure, hardness and bending strength of CNTs/TiAl alloys were investigated. The results indicated that CNTs reacted with the matrix to generate granular TiC and Ti2AlC reinforced phases stacked into bands at the grain boundaries, limiting grain growth. The Ti2AlC phase content increased with increasing CNT content. When the contents of the TiC and Ti2AlC phases were high, agglomeration occurred, leading to defects such as pits and cracks on the surface, which explains the weakened mechanical properties of the CNTs/TiAl alloys at room temperature. When the CNT content was 0.4 wt%, the average grain size was approximately 32 μm under the effects of fine grain strengthening and second phase strengthening. Moreover, the mechanical properties of the composite were the best at room temperature. The Vickers hardness and bending strength at room temperature were 377 HV and 879 MPa, respectively, and the compressive strength and strain were 2554 MPa and 31.86%, respectively. The fracture mode was mainly transgranular.

Room-temperature Tensile Strength and Thermal Shock Behavior of Spark Plasma Sintered W-K-TiC Alloys

Recrystallization Behavior after Annealing and Thermal Shock Tests of W-K-TiC Alloy

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Microstructure and Properties of TiN-reinforced W–Ti Alloys Prepared by Spark Plasma Sintering

Preparation and Characteristics of W–1 Wt.% TiC Alloy Via a Novel Chemical Method and Spark Plasma Sintering

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Preparation and Thermal Shock Characterization of Yttrium Doped Tungsten-Potassium Alloy

Effect of TaC Content on Microstructure and Properties of W-TaC Composites

Effect of tungsten micro-scale dispersed particles on the microstructure and mechanical properties of Ti–6Al–4V alloy

Microstructural Effects of Y2O3 and TiC Additions in Tungsten

Fabrication of W–1 Wt.% TiC Composites by Spark Plasma Sintering

Enhanced Electrical and Mechanical Properties of Alumina-Based Tic Composites by Spark Plasma Sintering

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Effect of carbon nanotube content on the microstructure and mechanical properties of CNTs/TiAl alloys

Effect of TiC Content on Microstructure and Mechanical Properties of High-temperature Titanium Matrix Composites

Preparation of TiC-doped W-Ti Alloy and Heat Flux Performance Test under Laser Beam Facility

The microstructure and elevated temperature strength of tungsten-titanium carbide composite

High-temperature tensile strengths of in situ synthesized TiC/Ti-alloy composites

Fabrication of Ultra-Fine-Grained W-TiC Alloys by a Simple Ball-Milling and Hydrogen Reduction Method

Effect of Mechanical Alloying on the Microstructure and Properties of W–Ti Alloys Fabricated by Spark Plasma Sintering

Spark plasma sintering of TiC ceramic with tungsten carbide as a sintering additive