Abstract:High temperature titanium alloys are being urgently developed owing to the requirements of advanced aerospace industry. Performance of the alloys in service under high-temperature environments always attracts great attention. In this study, variations of microstructure and mechanical property in TC25 (Ti-6.5Al-2Mo-1Zr-1Sn-1 W-0.2Si) dual-phase high temperature titanium alloy subjected to thermal exposure have been systematically investigated by coupling microstructural characterization, compositional analyses and mechanical measurement. It is found that strength is significantly enhanced while ductility is sharply degraded when the alloy is thermally exposed at 550 degrees C for a long duration of 100 h. Microstructural observations manifest that ternary alpha-needles (alpha t) are drastically precipitated from beta-ligaments inside transformed beta-matrix (beta trans) whilst alpha 2 (Ti3Al)-phase is produced from primary alpha-phase (alpha p) through ordered transformation. The precipitation of alpha t-needles is promoted by beta-phase metastability resulting from insufficient element partitioning in the initial microstructure. The beta-phase stability also renders alpha t-precipitation encounter size effect of beta-ligaments, where the precipitation is suppressed when beta-ligaments are thin in size. Both precipitation of alpha t-needles and alpha 2-phase triggers precipitation-hardening effect, which results in strain localization and thereby regresses alloy ductility. However, further analysis indicates that compared with alpha 2-phase, alpha t-precipitation plays more adverse role in embrittlement in the current alloy. This is different from thermal-exposed behavior of most of high temperature titanium alloys reported in literatures. These findings enrich our fundamental understanding on thermal stability of high temperature titanium alloys, and provide plausible implication to improve high temperature performance via controlling phase precipitation.

Recrystallization Behavior after Annealing and Thermal Shock Tests of W-K-TiC Alloy

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Room-temperature Tensile Strength and Thermal Shock Behavior of Spark Plasma Sintered W-K-TiC Alloys

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Surface Cracking of Tungsten-Vanadium Alloys under Transient Heat Loads

Microstructure and Hardness Evolution During Isothermal Process at 700 °C for Fe–24Mn–0.7Si–1.0Al TWIP Steel

Thermal Shock Resistance of Nanocrystalline and Ultrafine-Grained W-Y2O3-Ti Alloys

Thermal shock behavior of Ti2AlC from 200 °C to 1400 °C

Preparation of TiC-doped W-Ti Alloy and Heat Flux Performance Test under Laser Beam Facility

The Recrystallization Behavior of Surface Deformation Layer of (tib + TiC)/Ti–6Al–4V Composite During Isothermal Annealing

Preparation and Thermal Shock Characterization of Yttrium Doped Tungsten-Potassium Alloy

Microstructure Evolutions of the W–TiC Composite Conducted by Dual-Effects from Thermal Shock and He-ion Irradiation

Effect of Mechanical Alloying on the Microstructure and Properties of W–Ti Alloys Fabricated by Spark Plasma Sintering

Microstructural Evolution and Tensile Property of 1cr15ni36w3ti Superalloy During Thermal Exposure

Microstructure and Properties of TiN-reinforced W–Ti Alloys Prepared by Spark Plasma Sintering

Surface Morphology and Microstructure Evolution of Trace Titanium and Yttrium in W-K-Mo-Ti-Y Alloys under Transient Heat Loads

Microstructure Evolution and Recrystallization after Annealing of Tungsten Heavy Alloy Subjected to Severe Plastic Deformation

Microstructure Evolution and Nano-Precipitate of Multi-Stage Heat-Treated Ti–45Al–2Nb–2Cr-0.3C Alloy

Thermal Shock Behavior of W-0.5 Wt% Y 2 O 3 Alloy Prepared Via a Novel Chemical Method

Insights into Microstructural Stability and Embrittlement of TC25 High Temperature Titanium Alloy Subjected to Thermal Exposure