Abstract:The incessant quest in fabricating enhanced ceramic materials for use in aerospace, chemical plants, as a cutting tool, and other industrial applications has opened the way for the fabrication of ceramic-based composites with sintering additives which have been experimented to influence sinterability, microstructure, densification, and mechanical properties. The current research practices for the consolidation of ceramic matrix composite (CMC) have been in the utilization of metallic and non-metallic additives as a reinforcement for the ceramic matrix. The use of additives has a promising influence in ensuring the achievement of good microstructures and excellent properties. The use of metallic additives enhances the sinterability of CMC but it has a debilitating effect on its intrinsic mechanical properties, especially at high-temperature applications. Hence, its uses in a high-temperature application environment under high impact load are limited. Thus, the types and amount of additives to be added to a ceramic-based matrix composite depends on the type of application and properties desired to be achieved from the composites. One of the critical issues that have affected the properties of CMC is the type of powder metallurgy (PM) used for consolidation. PM has been experimented with to be efficient in manufacturing ceramic-based composites. Although, past review works have pinpointed diverse PM methods, viz, hot press, pressureless sintering, hot isostatic press, and spark plasma sintering (SPS), for manufacturing ceramics-based composites. Amidst these diverse methods, SPS has progressively been applied for the consolidation of ceramics, owning to its possibility of achieving a good sintered compact in a relatively short time with enhanced properties. This review focuses on the synthesis of TiC reinforced with sintering additives, with more attention on carbides as sintering additives. Carbide additives have the potential to improve microstructure, densification, and mechanical properties. In addition, future works on the consolidation and characterization of TiC are included in this review.

Spark plasma sintering of TiC ceramic with tungsten carbide as a sintering additive

Preparation and Characteristics of W–1 Wt.% TiC Alloy Via a Novel Chemical Method and Spark Plasma Sintering

Spark plasma sintering of TiN ceramics codoped with SiC and CNT

Fabrication of W–1 Wt.% TiC Composites by Spark Plasma Sintering

Densification and microstructure evolution of W-TiC-Y2O3 during spark plasma sintering

Microstructures and mechanical properties of TiB2 composite ceramics with co-addition of Ti and TiC fabricated by SPS

Densification, Microstructure and Mechanical Performance of TiC/Fe Composites by Spark Plasma Sintering

Microstructure, Mechanical Properties, and Sintering Behavior of Ti3O-Fe2TiO4-TiC Composites

Effect of nano-TiC addition on sinterability and mechanical properties of TiC high temperature ceramics

Crack tolerant TaC–SiC ceramics prepared by spark plasma sintering

Spark plasma sintering of ceramic matrix composite of TiC: microstructure, densification, and mechanical properties: a review

Sintering and densification mechanisms of tantalum carbide ceramics

Enhanced Electrical and Mechanical Properties of Alumina-Based Tic Composites by Spark Plasma Sintering

Preparation of High‐Strength Ti3AlC2 by Spark Plasma Sintering

Effect of Tungsten Carbide on Densification and Mechanical Properties of Silicon Nitride Ceramics by Spark Plasma Sintering

Spark plasma sintering of TiC-based composites toughened by submicron SiC particles

Synthesis and characterization of extremely hard and strong (W,Ti,Ta)C cermet by spark plasma sintering

Effect of TaC Content on Microstructure and Properties of W-TaC Composites

Spark plasma sintered WC-Ni cemented carbides with various contents of ZrC nano-powder

Comparing the effects of different sintering aids on spark plasma sintering of SiC ceramics

Effect of ZrC nano-powder addition on the microstructure and mechanical properties of binderless tungsten carbide fabricated by spark plasma sintering