Abstract:This work examines the integrate performance of a 380-mm-width × 30-mm-height louvered fin-and-tube heat exchanger combined with a 280-mm-diameter, 26°-pitch-angle axial flow cooling fan disturbance. First, the swirl velocity was derived from the fan outlet. Second, a 400-fps high-speed camera visual experiment was performed to confirm the findings. Following that, Colburn factor and Fanning friction factor with the disturbance were discussed based on the numerical replica of the combination experiment in FLUENT. Furthermore, their correlations from an L21(21 2 ) orthogonal test were reported using regression analysis and joint hypotheses test. Effectiveness-number of transfer units method assessed the deviation between experimental and predicted outcomes. The results indicated that swirl velocity might account for the performance deviation of the combination under a maximum error of 8.9 % at 500 r/min. Moreover, the numerical air volume and the pressure loss of the fan confirmed a heat transfer decrease of 10.3 % and a pressure loss increase of 11 % for the heat exchanger under disturbance. The correlation involving more fan variables could realize a Colburn factor of 86 % within an error of 4.1 % and a friction factor of 100 % within an error of 0.34 %, respectively. The maximum of 4.5 % at 600 r/min for total heat transfer quantity and 6.8 % at 500 r/min for pressure loss also encourage a correlation application above a Reynolds number in the range of 73.99–423.07, a radius in the range 46.66–140 mm, a resultant angle in the range 51.37–73.93°, and a fan speed in the range 300–800 r/min. Hopefully, this work might offer a scientific basis for further systematic research on the combined fan and heat exchanger and supplement related research.

CFD study on the air side performance of an automobile louvered-fin type heat exchanger

Numerical auxiliary study of charge-air cooler design

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Research on the air-side thermal hydraulic performance of louvered fin and flat tube heat exchangers under low-pressure environment

An Experimental and Numerical Investigation of Air Side Heat Transfer and Flow Characteristics on Finned Plate Configuration

Experimental Study on Heat Transfer Performance of the Multi-Region Louver Fins

Numerical simulation of slit fin cell's flow and heat transfer

Numerical analysis of the flow and heat transfer characteristics of a staggered perforated louver-finned heat exchanger

A numerical and experimental study of chevron, corrugated-plate heat exchangers

CFD Techniques for the Design of Plate-fin Heat Exchangers with Plain Fins and Serrated Fins

Numerical Study of the Air Inlet Angle Influence on the Air–side Performance of Plate-Fin Heat Exchangers

The Study of Effects of Fin Parameters on Thermal Hydraulic Performance of a Vehicular Charged Air Cooler

Numerical investigation of louver edges effect on the performances of louvered fin compact heat exchanger

CFD Technology for Finned Tube Heat Exchanger Base on Line and Interleaving Constracts

Heat Transfer and Pressure Drop Correlations for Compact Heat Exchangers with Multi-Region Louver Fins

Numerical and experimental investigation on the integrate performance of axial flow cooling fan and heat exchanger

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection