Abstract:Air-side heat transfer and friction characteristics of five kinds of fin-and-tube heat exchangers, with the number of tube rows (N=12) and the diameter of tubes (Do=18mm), have been experimentally investigated. The test samples consist of five types of fin configurations: crimped spiral fin, plain fin, slit fin, fin with delta-wing longitudinal vortex generators (VGs) and mixed fin with front 6-row vortex-generator fin and rear 6-row slit fin. The heat transfer and friction factor correlations for different types of heat exchangers were obtained with the Reynolds numbers ranging from 4000 to 10000. It was found that crimped spiral fin provides higher heat transfer and pressure drop than the other four fins. The air-side performance of heat exchangers with the above five fins has been evaluated under three sets of criteria and it was shown that the heat exchanger with mixed fin (front vortex-generator fin and rear slit fin) has better performance than that with fin with delta-wing vortex generators, and the slit fin offers best heat transfer performance at high Reynolds numbers. Based on the correlations of numerical data, Genetic Algorithm optimization was carried out, and the optimization results indicated that the increase of VG attack angle or length, or decrease of VG height may enhance the performance of vortex-generator fin. The heat transfer performances for optimized vortex-generator fin and slit fin at hand have been compared with numerical method.

Experimental Study on Heat Transfer Performance of the Multi-Region Louver Fins

Experimental Study on Heat Transfer and Flow Resistance Characteristics of Louver Fins

Numerical auxiliary study of charge-air cooler design

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

3D Numerical Simulation of the Air Flow Among the Multi-louvered Fins

Heat Transfer and Pressure Drop Correlations for Compact Heat Exchangers with Multi-Region Louver Fins

Thermal-hydraulic Performance of Novel Louvered Fin Using Flat Tube Cross-Flow Heat Exchanger

Experiment and Numerical Simulation for Characteristics of Two Slotted Fins

Correlation of Flow and Heat Transfer Characteristics for Multi-louvered Fin

Numerical simulation of louver fin surface flow and heat transfer and configuration optimization

EXPERIMENTAL AND NUMERICAL STUDY ON HEAT TRANSFER CHARACTERISTICS OF THREE-ROW SLOTTED FINS WITH SMALL DIAMETERS

Configuration Design and Experimental Investigation of Fin Used in 5mm Fin-and-tube Heat Exchangers for Air Conditioner

Air Side Performance of a Novel Lanced Fin and Flat Tube Heat Exchanger

Numerical Study on Air-Side Performance of an Integrated Fin and Micro-Channel Heat Exchanger

Research on the air-side thermal hydraulic performance of louvered fin and flat tube heat exchangers under low-pressure environment

An Experimental Study of the Air-Side Performance of a Novel Louver Spiral Fin-and-tube Heat Exchanger

SIMULATION AND PARAMETRIC ANALYSIS OF MICROCHANNEL CONDENSOR

Parametrical Numerical and Experimental Investigation on Heat Transfer and Friction Characteristics of Offset Strip Fins

Experimental Study on Heat Transfer of Air Enhancement in an Internally Finned Tube

The Study of Effects of Fin Parameters on Thermal Hydraulic Performance of a Vehicular Charged Air Cooler

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns