Abstract:This study presents a hybrid method of three-dimensional computational fluid dynamics (CFD) commercial software and inverse method along with experimental data and various flow models to study the natural convection heat transfer and fluid flow characteristics of vertical annular elliptical finned tube heat exchangers for various fin spacings. The inverse method of the finite difference method along with the experimental temperature data is first applied to estimate the heat transfer coefficient on the fins. After that, CFD along with various flow models and estimated heat transfer coefficients are used to determine air temperature and air velocity profiles, fin surface temperature and heat transfer coefficient on the fins. More accurate numerical results, appropriate flow model and number of grid points, number of iterations and relative convergence criteria can be obtained when the resulting heat transfer coefficient and fin temperature are as close as possible to the inverse results and experimental temperature measurements, respectively. The results show that the zero-equation turbulence model is more suitable for this study than other flow models. The choice of relative convergence criteria, number of iterations and grid points are important for obtaining more accurate results. The commercial software version, the relative convergence criteria for momentum and energy equations, the number of iterations and the N-t value vary with the fin spacing. The effect of the round-off error on the numerical results obtained needs to be considered. The heat transfer coefficient increases with increasing fin spacing and approaches a constant. The best fin spacing is about 18 mm. The fin efficiency of the annular elliptical fins is higher than that of the annular circular fins. The proposed correlations between Nusselt number and Rayleigh number is in good agreement with the numerical and inverse results obtained. (C) 2018 Elsevier Ltd. All rights reserved.

The Study of Effects of Fin Parameters on Thermal Hydraulic Performance of a Vehicular Charged Air Cooler

Numerical auxiliary study of charge-air cooler design

The Effect Analysis of Fin Arrangement on Thermal Hydraulic Performance of a Vehicular Cooler

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Effects of Fin Parameters on the Thermal Hydraulic Performance of a Vehicular Radiator

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

Optimal Design of a Vehicular Charged-Air Cooler Based on Numerical Simulation of Thermal-Hydraulic Performances

Cooling Performance Analysis of Outside Fins of the Closed Circuit Axial Piston Transmission

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

Optimal Design Method of Automotive Charged Air Cooler Based on the Matching of Hot-Side and Cold-Side Flow Channels

Optimal Design Method of Fins in Automotive Oil Cooler Based on the Thermal-Hydraulic Performances

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Numerical simulation of slit fin cell's flow and heat transfer

Numerical Simulation Study on Thermal-Hydraulic Performances of Vehicular Radiator Heat Transfer Units

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Performance Analysis and Structural Optimization of a Finned Liquid-Cooling Radiator for Chip Heat Dissipation

Effect of porous fin parameters on the turbulent natural convection heat transfer in the side-heated cavity containing the internal heat source

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Machine learning and computational fluid dynamics based optimization of finned heat pipe radiator performance