Abstract:This study presents a hybrid method of three-dimensional computational fluid dynamics (CFD) commercial software and inverse method along with experimental data and various flow models to study the natural convection heat transfer and fluid flow characteristics of vertical annular elliptical finned tube heat exchangers for various fin spacings. The inverse method of the finite difference method along with the experimental temperature data is first applied to estimate the heat transfer coefficient on the fins. After that, CFD along with various flow models and estimated heat transfer coefficients are used to determine air temperature and air velocity profiles, fin surface temperature and heat transfer coefficient on the fins. More accurate numerical results, appropriate flow model and number of grid points, number of iterations and relative convergence criteria can be obtained when the resulting heat transfer coefficient and fin temperature are as close as possible to the inverse results and experimental temperature measurements, respectively. The results show that the zero-equation turbulence model is more suitable for this study than other flow models. The choice of relative convergence criteria, number of iterations and grid points are important for obtaining more accurate results. The commercial software version, the relative convergence criteria for momentum and energy equations, the number of iterations and the N-t value vary with the fin spacing. The effect of the round-off error on the numerical results obtained needs to be considered. The heat transfer coefficient increases with increasing fin spacing and approaches a constant. The best fin spacing is about 18 mm. The fin efficiency of the annular elliptical fins is higher than that of the annular circular fins. The proposed correlations between Nusselt number and Rayleigh number is in good agreement with the numerical and inverse results obtained. (C) 2018 Elsevier Ltd. All rights reserved.

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Numerical Estimation of Heat Transfer Characteristics for Two-Row Plate-Finned Tube Heat Exchangers with Experimental Data

Heat transfer simulation of annular elliptical fin-and-tube heat exchanger by transition SST model

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Numerical Computations on Flow and Heat Transfer Characteristics of a Helically Coiled Heat Exchanger Using Different Turbulence Models

Numerical simulation of 3-D turbulent flow and heat transfer over rectangular fins with elliptic tube

Comparative Study on Fluid Flow and Heat Transfer Performance in the Channel of Annular Finned Tube

Novel study on inverse convection–conduction heat transfer for plate-finned tube heat exchanger

Study on Heat Transfer Performance of Fin-and-tube Heat Exchanger with Elliptical Fins

Numerical Simulation of Heat Transfer on Flat Fin Tube Heat Exchangers

Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers☆

Parametric Study on Thermal-Hydraulic Characteristics of H-Type Finned Tube Heat Exchangers

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Study of inverse natural convection-conduction heat transfer for in-line tube heat exchanger in a hot box with experimental data

NUMERICAL SIMULATION OF CONVECTIVE HEAT TRANSFER AND PRESSURE DROP IN TWO TYPES OF LONGITUDINALLY AND INTERNALLY FINNED TUBES

Numerical Simulation of the Flow and Heat-Transfer Characteristics of an Aligned External Three-Dimensional Rectangular-Finned Tube Bank

Experimental and Numerical Investigation on Natural Convection Heat Transfer Characteristics of Vertical 3-D Externally Finned Tubes

Numerical Analysis on Heat Transfer and Pressure Drop Performance of an Asymmetric Finned Tube Heat Exchanger

Multiscale Simulations of Fluid Flow for Finned Elliptic Tube Heat Exchangers Using Porous Media Approach

Innovative analysis of local and average air-side heat transfer coefficients in fin-and-tube heat exchangers using CFD and experimental method

Numerical Computation of Laminar Natural Convection Heat Transfer Around a Horizontal Compound Tube with External Longitudinal Fins