Abstract:This study presents a hybrid method of three-dimensional computational fluid dynamics (CFD) commercial software and inverse method along with experimental data and various flow models to study the natural convection heat transfer and fluid flow characteristics of vertical annular elliptical finned tube heat exchangers for various fin spacings. The inverse method of the finite difference method along with the experimental temperature data is first applied to estimate the heat transfer coefficient on the fins. After that, CFD along with various flow models and estimated heat transfer coefficients are used to determine air temperature and air velocity profiles, fin surface temperature and heat transfer coefficient on the fins. More accurate numerical results, appropriate flow model and number of grid points, number of iterations and relative convergence criteria can be obtained when the resulting heat transfer coefficient and fin temperature are as close as possible to the inverse results and experimental temperature measurements, respectively. The results show that the zero-equation turbulence model is more suitable for this study than other flow models. The choice of relative convergence criteria, number of iterations and grid points are important for obtaining more accurate results. The commercial software version, the relative convergence criteria for momentum and energy equations, the number of iterations and the N-t value vary with the fin spacing. The effect of the round-off error on the numerical results obtained needs to be considered. The heat transfer coefficient increases with increasing fin spacing and approaches a constant. The best fin spacing is about 18 mm. The fin efficiency of the annular elliptical fins is higher than that of the annular circular fins. The proposed correlations between Nusselt number and Rayleigh number is in good agreement with the numerical and inverse results obtained. (C) 2018 Elsevier Ltd. All rights reserved.

Numerical simulation of slit fin cell's flow and heat transfer

Numerical auxiliary study of charge-air cooler design

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Detailed Heat Transfer Measurements of Curved Fin Channels

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Numerical Simulation of Heat Transfer in Finned Tube of Heat Recovery Unit Using Fluid-Solid Coupled Method

CFD Simulation of Fluid Flow and Heat Transfer in Channels of Plate-Fin Heat Exchangers

Numerical Simulation the Effect of Inlet-outlet-tube Position on Plate-fin Oil Cooler

Natural Convection Heat Transfer along Vertical Cylinder Heat Sinks with Longitudinal Fins

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Numerical Simulation of Natural Convection Heat Transfer for Annular Elliptical Finned Tube Heat Exchanger with Experimental Data

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

CFD study on serrated fin performance at different flow angles

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Three-dimensional numerical simulation on flow and heat transfer in spirally inner finned tubes

Study of Heat Conduction Transfer Functions of Fins

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Numerical Study of Effect of Liquid Viscosity Variation on Fins Surface Performance