Abstract:A heat exchanger is an important component where high-temperature hot air and normal-temperature water exchange heat. The heat exchange area of the finned tube heat exchanger is calculated by the rated working conditions. However, with the decrease of the heat storage temperature, the hot air temperature at the outlet of the thermodynamic energy storage device changes in a large range, directly affecting the heat exchange capacity and efficiency of the finned tube heat exchanger. This paper's three-dimensional model is established. The heat exchanger of the finned tube is designed according to the temperature of the outlet section and the return section temperature of the heat storage system. The thermodynamic physical parameter property and characteristics of which heat exchanger's finned tube in the air's velocity range of 1∼10 m/s are simulated by fluent software. The velocity, temperature, pressure, and heat exchanger coefficient distribution characteristics at different positions along the airflow direction are obtained. The simulation results show that the mean flow velocity is 2.0 m/s and 5.0 m/s at the inlet cross-section. The average temperature difference between the inlet and outlet is 69.5 K and 100.5 K, respectively. The fin surface temperature difference between the first and eighth rows of finned tubes is 12.5 K and 14.4 K, respectively. The air pressure loss at the air channel inlet's section and outlet's section is 16.1 Pa and 69.4 Pa, respectively. When the inlet flow rate change from starting at 1.0 m/s and ending at 10.0 m/s, the tube's wall coefficient of heat transfer, which is the second level of finned tubes, only increases by 1.8 times. The tube's wall coefficient of heat transfer of the eighth level of finned tubes increases by the maximum, to 5 times the original, but the heat energy exchange capacity of which the second level of finned tubes is always the strongest.

Numerical Simulation the Effect of Inlet-outlet-tube Position on Plate-fin Oil Cooler

Numerical Simulation and Experimental Study of Three-Dimensional Flow Outside Tube of Plate-Fin and Tube Heat Exchangers

Numerical Simulation of Automotive Engine Oil Cooler

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Numerical simulation of slit fin cell's flow and heat transfer

Numerical Study of the Air Inlet Angle Influence on the Air–side Performance of Plate-Fin Heat Exchangers

Numerical Simulation on Heat Transfer and Pressure Drop of a Plate-fin Heat Transfer

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Numerical simulation on influence of plate exchanger structural parameter to heat transfer

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins

Numerical Simulation of Heat Transfer and Fluid Flow on Marine Gas Turbine Intercooler

The Performance Simulation and Optimization on Plate Fin Oil Coolers

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

NUMERICAL SIMULATION OF DISTRIBUTOR CONFIGURATION OF PLATE-FIN HEAT EXCHANGER

Numerical simulation of heat transfer and flow performance of flat fin

Numerical Simulation of Round Nozzle Impinging on Plate Cooling

Numerical simulation and field synergy analysis of heat transfer performance of radial slit fin surface

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical Simulation of the Flow Field Characteristics of Perforated Fin-in-tube Heat Exchanger

Three-dimensional numerical study of heat transfer characteristics of plain plate fin-and-tube heat exchangers from view point of field synergy principle

Numerical Analysis Of Plain Fin-And-Oval-Tube Heat Exchanger With Different Inlet Angles