Abstract:A heat exchanger is an important component where high-temperature hot air and normal-temperature water exchange heat. The heat exchange area of the finned tube heat exchanger is calculated by the rated working conditions. However, with the decrease of the heat storage temperature, the hot air temperature at the outlet of the thermodynamic energy storage device changes in a large range, directly affecting the heat exchange capacity and efficiency of the finned tube heat exchanger. This paper's three-dimensional model is established. The heat exchanger of the finned tube is designed according to the temperature of the outlet section and the return section temperature of the heat storage system. The thermodynamic physical parameter property and characteristics of which heat exchanger's finned tube in the air's velocity range of 1∼10 m/s are simulated by fluent software. The velocity, temperature, pressure, and heat exchanger coefficient distribution characteristics at different positions along the airflow direction are obtained. The simulation results show that the mean flow velocity is 2.0 m/s and 5.0 m/s at the inlet cross-section. The average temperature difference between the inlet and outlet is 69.5 K and 100.5 K, respectively. The fin surface temperature difference between the first and eighth rows of finned tubes is 12.5 K and 14.4 K, respectively. The air pressure loss at the air channel inlet's section and outlet's section is 16.1 Pa and 69.4 Pa, respectively. When the inlet flow rate change from starting at 1.0 m/s and ending at 10.0 m/s, the tube's wall coefficient of heat transfer, which is the second level of finned tubes, only increases by 1.8 times. The tube's wall coefficient of heat transfer of the eighth level of finned tubes increases by the maximum, to 5 times the original, but the heat energy exchange capacity of which the second level of finned tubes is always the strongest.

Cooling Air Flowrate Distribution Among Parallel Heat Exchangers

Numerical auxiliary study of charge-air cooler design

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Numerical Simulation of Heat Transfer Characteristics of Finned Tube Heat Exchanger at Different Flow Velocities

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Numerical Simulation the Effect of Inlet-outlet-tube Position on Plate-fin Oil Cooler

Numerical simulation of slit fin cell's flow and heat transfer

Flow and Heat Transfer in Compact Offset Strip Fin Surfaces

Experimental and Numerical Investigation of Thermal -Hydraulic Performance in Wavy Fin-and-flat Tube Heat Exchangers

Numerical simulation of heat transfer and flow performance of flat fin

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection

A Comparative Study Of Fin-And-Tube Heat Exchangers With Various Fin Patterns

Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers☆

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

Numerical Estimation of Heat Transfer Characteristics for Two-Row Plate-Finned Tube Heat Exchangers with Experimental Data

Study of flow and heat transfer performance of plate-fin heat exchanger

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Experimental Investigation on Heat Transfer and Flow Friction Characteristics in Three Types of Plate Fin-and-Tube Heat Exchangers

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

NUMERICAL STUDY ON FLOW DISTRIBUTION IN PLATE-FIN HEAT EXCHANGERS