Abstract:This work examines the integrate performance of a 380-mm-width × 30-mm-height louvered fin-and-tube heat exchanger combined with a 280-mm-diameter, 26°-pitch-angle axial flow cooling fan disturbance. First, the swirl velocity was derived from the fan outlet. Second, a 400-fps high-speed camera visual experiment was performed to confirm the findings. Following that, Colburn factor and Fanning friction factor with the disturbance were discussed based on the numerical replica of the combination experiment in FLUENT. Furthermore, their correlations from an L21(21 2 ) orthogonal test were reported using regression analysis and joint hypotheses test. Effectiveness-number of transfer units method assessed the deviation between experimental and predicted outcomes. The results indicated that swirl velocity might account for the performance deviation of the combination under a maximum error of 8.9 % at 500 r/min. Moreover, the numerical air volume and the pressure loss of the fan confirmed a heat transfer decrease of 10.3 % and a pressure loss increase of 11 % for the heat exchanger under disturbance. The correlation involving more fan variables could realize a Colburn factor of 86 % within an error of 4.1 % and a friction factor of 100 % within an error of 0.34 %, respectively. The maximum of 4.5 % at 600 r/min for total heat transfer quantity and 6.8 % at 500 r/min for pressure loss also encourage a correlation application above a Reynolds number in the range of 73.99–423.07, a radius in the range 46.66–140 mm, a resultant angle in the range 51.37–73.93°, and a fan speed in the range 300–800 r/min. Hopefully, this work might offer a scientific basis for further systematic research on the combined fan and heat exchanger and supplement related research.

Numerical study of flow and heat transfer on construction machinery detached vehicular cooling system

Simulation, Experimentation, and Collaborative Analysis of Adjacent Heat Exchange Modules in a Vehicular Cooling System

Numerical auxiliary study of charge-air cooler design

3D Thermal Analysis of a Permanent Magnet Motor with Cooling Fans

Numerical Simulation On Ionic Wind Heat Transfer In A Thermoelectric Cooling Sysytem

CFD Calculation and Analysis of Cooling Jacket Flow and Heat Transfer for Car Engine

Three-dimensional numerical simulation on thermal performance in counter flow natural draft cooling tower

Numerical study of the cold finned-tube bundle heat exchanger under natural convection for a novel passive displacement cooling system

Three-Dimensional Numerical Study on Thermal Performance in A Natural Draft Wet Cooling Tower

Thermo-Flow Performances for the Main-Auxiliary Integrated Natural Draft Dry Cooling System

Three-dimensional Numerical Study on Thermal Performance of a Super Large Natural Draft Cooling Tower of 220m Height

Optimization of Motor Heat Dissipation Systems Based on Three Dimensional Flow Field Analysis

Numerical Study of Natural Draft Wet Cooling Tower

Numerical Simulation Study on Thermal-Hydraulic Performances of Vehicular Radiator Heat Transfer Units

Numerical and experimental investigation on the integrate performance of axial flow cooling fan and heat exchanger

The Study of Effects of Fin Parameters on Thermal Hydraulic Performance of a Vehicular Charged Air Cooler

Modeling and Numerical Simulation of Axial Fan for Dry-Wet Combined Cooling System

Numerical research on hydraulic and thermal performance of the motor water jackets based on the orthogonal experiment

Numerical Study of the Thermal Performance in Natural Draft Wet Cooling Tower with Different Fill Types

Optimization Based on Computer Fluid Dynamics Finite Element Method Automotive Cooling Fan Structure

Research on Heat Generation Law and Cooling System Performance of Hydraulic System of Combined Machine Tool