Abstract:Three-dimensional numerical simulations were performed for laminar flow of wavy fin-and-tube heat exchangers by using body-fitted coordinates (BFC) method with fin efficiency effect accounted. The prediction results of average Nusselt number, friction factor and fin efficiency were compared with the related experimental correlations [R.C. Xin, H.Z. Li, H.J. Kang, W. Li, W.Q. Tao, An experimental investigation on heat transfer and pressure drop characteristics of triangular wavy fin-and-tube heat exchanger surfaces, J. Xi'an Jiaotong Univ. 28 (2) (1994) 77–83] and Schmidt approximation [T.E. Schmidt, Heat transfer calculations for extended surfaces, Refrigerating Engineering (April 1949) 351–357]. For Reynolds numbers based on the tube outside diameter ranging from 500 to 4000, the mean deviation is 3.3% for Nusselt number, 1.9% for friction factor and 3.6% for fin efficiency. The distributions of local Nusselt number and fin efficiency on fin surface were studied at wavy angle equal to 0° (plain plate fin), 10° and 20° respectively. The local Nusselt number decreases along the air flow direction, but fin efficiency increases in general. The wavy angle can greatly affect the distributions of local Nusselt number and fin efficiency, and make the distributions present fluctuation along the flow direction. The result also shows that the fin efficiency at the inlet region of wavy fin is larger than that of plain plate fin at the same region. With the increase of Reynolds number, the effects of wavy angle on the distributions of local Nusselt number and fin efficiency are more and more significant.

Numerical Study of the Air Inlet Angle Influence on the Air–side Performance of Plate-Fin Heat Exchangers

Numerical auxiliary study of charge-air cooler design

Investigation of air inlet angle influence on air-side heat transfer performance of finned oval tube heat exchanger

Influence of Air Inlet Angle on Flow Characteristics of a Finned Oval-tube Heat Exchanger

Experimental investigation of heat transfer and resistance characteristics of a finned oval-tube heat exchanger with different air inlet angles

Experimental study of the effect of air inlet angle on the air-side performance for cross-flow finned oval-tube heat exchangers

Numerical Analysis Of Plain Fin-And-Oval-Tube Heat Exchanger With Different Inlet Angles

Numerical Study on Air-Side Performance of an Integrated Fin and Micro-Channel Heat Exchanger

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Influence of Fin Arrangement on Fluid Flow and Heat Transfer in the Inlet of a Plate-Fin Heat Exchanger

Airside Fin Efficiencies for Finned-Tube Heat Exchangers with Forced Convection

Pressure Analysis of Airflow with Different Inlet Angle in the Oblique Rectangular Fin Channels

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers☆

Numerical Simulation of the Thermodynamic Process of Air Flow on Fin Surfaces in Heat Exchangers

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

Numerical Simulation the Effect of Inlet-outlet-tube Position on Plate-fin Oil Cooler

Numerical Analysis on Heat Transfer and Pressure Drop Performance of an Asymmetric Finned Tube Heat Exchanger

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

An Experimental Investigation on Air-Side Performances of Finned Tube Heat Exchangers for Indirect Air-Cooling Tower