Abstract:In this article, a numerical study is conducted to predict the air-side heat transfer and pressure drop characteristics of slit fin-and-tube heat transfer surfaces. A three-dimensional steady laminar model is applied, and the heat conduction in the fins is also considered. Five types of slit fins, named slit 1, slit 2, slit 3, slit 4, and slit 5, are investigated, which have the same global geometry dimensions and the same numbers of strips on the fin surfaces. The only difference among the five slit fins lies in the strip arrangement. Slit 1 has all the strips located in the front part of the fin surface, then, following the order from slit 1 to slit 5, the strip number in the front part decreases and, correspondingly, the strip number in the rear part increases, so that all the strips of slit 5 are located in the rear part. Furthermore, slit 1 and slit 5, slit 2 and slit 4, have a symmetrical strip arrangement along the flow direction. The numerical results show that, following the order from slit 1 and slit 5, the heat transfer rate increases at first, reaching a maximum value at slit 3, which has the strip arrangement of “front coarse and rear dense”; after that, it begins to decrease, as does the fin efficiency. Although they have the symmetrical strip arrangement along the flow direction, slit 5 has 7% more Nusselt number than slit 1, and slit 4 also has 7% more Nusselt number than slit 2, which shows that strip arrangement in the rear part is more effective than that in the front part. Then the difference of heat transfer performance among five slit fins is analyzed from the viewpoint of thermal resistance, which shows that when the thermal resistances in the front and rear parts are nearly identical, the optimum enhanced heat transfer fin can be obtained. This quantitative rule, in conjunction with the previously published qualitative principle of “front sparse and rear dense,” can give both quantitative and qualitative guides to the design of efficient slotted fin surfaces. Finally, the influence of fin material on the performance of enhanced-heat-transfer fins is discussed.

Three-Dimensional Numerical Simulation on Laminar Heat Transfer and Fluid Flow Characteristics of Strip Fin Surface With X-Arrangement of Strips

Numerical Design of Efficient Slit Fin Surfaces with Strips in Different Directions

Three Dimensional Numerical Simulation and Analysis of the Airside Performance of Slotted Fin Surfaces with Radial Strips

Optimum Design Of Two-Row Slotted Fin Surface With X-Shape Strip Arrangement Positioned By "Front Coarse And Rear Dense" Principle, Part I: Physical/Mathematical Models And Numerical Methods

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

NUMERICAL DESIGN OF EFFICIENT SLOTTED FIN SURFACE BASED ON THE FIELD SYNERGY PRINCIPLE

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.

Three-dimensional numerical study of heat transfer characteristics of plain plate fin-and-tube heat exchangers from view point of field synergy principle

Numerical simulation of slit fin cell's flow and heat transfer

Experimental and Numerical Study on Heat Transfer and Fluid Flow Characteristics of Slotted Fin and Tube Heat Transfer Surfaces

Numerical study of local heat transfer coefficient and fin efficiency of wavy fin-and-tube heat exchangers☆

Numerical Study on the Heat Transfer and Pressure Drop Characteristics of Fin-and-tube Surface with Four Round-Convex Strips Around Each Tube

Numerical Design of an Efficient Wavy Fin Surface Based on the Local Heat Transfer Coefficient Study

Experimental and numerical investigation on air-side performance of fin-and-tube heat exchangers with various fin patterns

Flow and Heat Transfer in Compact Offset Strip Fin Surfaces

Three-dimensional Numerical Simulation of Flow and Heat Transfer on Slit Fins

The Influence of Strip Location on the Pressure Drop and Heat Transfer Performance of a Slotted Fin

Application of Combined Enhanced Techniques for Design of Highly Efficient Air Heat Transfer Surface

Numerical simulation and field synergy analysis of heat transfer performance of radial slit fin surface

Numerical study on performance and fin efficiency of wavy fin-and-tube heat exchangers