Abstract:Experimental and numerical analyses were carried out to study the fluid flow and heat transfer characteristics of two slotted fin surfaces (X-type and Arc-type) in fin-and-tube heat exchangers. Experiments were conducted by using PIV and infrared thermal-vision systems. Good agreement was found between numerical and experimental data under the Reynolds number ranging from 558 to 2235. The results showed that the heat transfer performance of the X-type fin surface was superior to that of the Arc-type fin surface due to more reasonable strips arranging along the flow direction for periodical renewal of the flow and thermal boundary layers, although the Arc-type fin surface could improve the flow pattern and heat transfer characteristics in the weak recirculation zone behind the tube. However, the pressure drop of the X-type fin surface was higher than that of the Arc-type fin surface. A novel improved slotted fin surface (Butterfly-type) was proposed and proved to exhibit the best overall performance. The results of the performance evaluation for the three slotted fin surfaces revealed that the Butterfly-type slotted fin surface could: 1. increase heat duty by approximately 20–24% for FG (fixed geometry) and IPP (identical pumping power). 2. Reduce pumping power by approximately 38–51% for FG and IHD (identical heat duty). 3. Reduce heat exchange surface area by approximately 21–25% for IPP and IHD. Finally, analysis from the view point of the field synergy principle demonstrated that the improved Butterfly-type slotted fin surface could appreciably reduce the domain average synergy angle between the velocity and temperature gradient, and hence, improve the synergy between the two fields.

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Numerical Simulation of the Thermal Hydraulic Performance of a Plate Pin Fin Heat Sink

Hydraulic and Thermal Performances of A Novel Configuration of High Temperature Ceramic Plate-Fin Heat Exchanger

Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number

Numerical study and experimental verification of transverse direction type serrated fins and field synergy principle analysis

3D Numerical Simulation on Fluid Flow and Heat Transfer Characteristics in Multistage Heat Exchanger with Slit Fins

Thermo-hydraulic Performances of Internally Finned Tube with a New Type Wave Fin Arrays

Numerical Simulation of Heat Exchange Performance of Fin Tube Cooling Coil with Different Fin Geometric Parameters

Numerical simulation of slit fin cell's flow and heat transfer

An Experimental and Numerical Investigation of Air Side Heat Transfer and Flow Characteristics on Finned Plate Configuration

Experimental Investigation on Flow and Heat Transfer Performance of a Novel Heat Fin-Plate Radiator for Electronic Cooling

Effect of Fin Types and Prandtl Number on Performance of Plate-Fin Heat Exchanger: Experimental and Numerical Assessment

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins

Three-dimensional Numerical Simulation of Flow and Heat Transfer on Slit Fins

Optimization of Cooling Effects with Fins of Variable Cross-Sections

Three-Dimensional Numerical Simulation on the Laminar Flow and Heat Transfer in Four Basic Fins of Plate-Fin Heat Exchangers

Numerical Simulation of Heat Transfer and Flow of Cooling Air in Triangular Wavy Fin Channels

Thermo-Hydraulic Performance Evaluation, Field Synergy, and Entransy Dissipation Analysis for Hexagon-Like and Circular-Like Pin Finned Tube Bundles

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

PIV and thermal-vision experimental and numerical investigation on the airside performance of slotted fin surfaces