Abstract:An apparatus for transferring thermal energy across an impermeable barrier between two or more fluids is a heat exchanger. The effective transmission of heat from a hot fluid to a cold fluid is its primary goal. The temperature differential between the two fluids directly affects this heat transfer. Using CFD study with FLUENT 2020 R1, the performance characteristics of the compact plate fin heat exchanger's improved surfaces are examined. The simulation of heat transfer and flow encompassed a variety of velocities including completely turbulent regions. The pressure, temperature, and velocity contours were taken from the Fluent simulations. To determine the heat exchanger's flow and heat transfer performance, numerical analysis has been done. Since boundary conditions are crucial to CFD, they have been carefully chosen. The flow field, heat transfer, thickness, and wavelength were all predicted using the software code for a range of air to water velocities. Three distinct wavelengths of numerical simulations for a plate-fin heat exchanger were used in the study (10, 20, and 30). There were changes to the fin thickness, entry locations, and air and water entry velocities. Solid Works and Ansys were used to create the geometry for the three-level fin models that were placed inside the heat exchanger, both with and without a cover. For determining the heat exchanger's geometry and fin isometry, three levels measuring 19.6 mm in height and 53.64 mm in width were constructed. The fins have a thickness of 0.2 to 0.4 mm. As the air and water velocities vary, so does the temperature inside the heat exchanger. Because the topmost layer is a warm stream's flow channel, the temperature rises there, whereas the opposite effect is seen close to the bottom layer. Convection heat transmission to the surroundings and conduction heat transfer through the heat exchanger's side plates are the causes of fluid temperature fluctuations in the depth direction.

An Experimental and Numerical Investigation of Air Side Heat Transfer and Flow Characteristics on Finned Plate Configuration

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Flow and Heat Transfer Analysis of Perforated Fin in Compact Heat Exchanger

Study on heat transfer and friction characteristics in fin-tube heat exchangers used for electrical machines cooling

A Numerical Study on the Air-Side Heat Transfer of Perforated Finned-Tube Heat Exchangers with Large Fin Pitches

Numerical Analysis of Header Structure Improvement in a Plate-Fin Heat Exchanger

Numerical study on hydrodynamic characteristics of plate-fin heat exchanger using porous media approach

Numerical Modeling and Experimental Verification of Flow and Heat Transfer over Serrated Fins at Low Reynolds Number

Numerical and Experimental Study on the Flow and Heat Transfer Performance of a Plate-Fin Heat Exchanger Using for Environmental Protection

Numerical simulation of heat transfer and flow characteristics for plate fin-and-tube heat exchanger with ring-bridge slit fins

Enhancing Plate-Fin Heat Exchanger Hydraulic Thermal Performance Through Air-Side Fin Optimization Based on Pseudo-3D Topology Optimization

Performance Investigation of an Innovative Offset Strip Fin Arrays in Compact Heat Exchangers

Heat Transfer and Pressure Drop in Plate Fin Heat Exchangers: A Numerical Approach

Numerical Simulation and Experimental Verification on Thermal Performance of A Novel Fin-Plate Thermosyphon

Experimental and numerical investigation of additively manufactured novel compact plate-fin heat exchanger

Numerical investigation of heat transfer and pressure drop characteristics on the hot fluid side of the plate-fin precooler under negative pressure conditions

Numerical analysis on heat transfer and flow resistance performances of a heat exchanger with novel perforated wavy fins

Experiment on Forced Convection-Condensation Heat Transfer Characteristics Based on Finned Plate Configuration

Numerical Study of Fluid Flow and Heat Transfer in Plate-Fin Heat Transfer Exchanger of Htgr

CFD Techniques for the Design of Plate-fin Heat Exchangers with Plain Fins and Serrated Fins

Numerical studies on heat transfer and pressure drop characteristics of flat finned tube bundles with various fin materials