Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

A Study of Contact Properties Between Molybdenum and Amorphous Silicon Tin Oxide Thin Film Transistors

35.3: Self‐formed Nano‐scale Metal‐oxide Contact Interlayer for Amorphous Silicon Tin Oxide TFTs

Induced nano-scale self-formed metal-oxide interlayer in amorphous silicon tin oxide thin film transistors

Effect of Source/Drain Electrodes on the Electrical Properties of Silicon–Tin Oxide Thin-Film Transistors

Temperature-induced stoichiometric changes in thermally grown interfacial oxide in tunnel-oxide passivating contacts

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

Solution-Processed Silicon Doped Tin Oxide Thin Films and Thin-Film Transistors Based on Tetraethyl Orthosilicate.

Aluminum Oxide Passivating Tunneling Interlayers for Molybdenum Oxide Hole-Selective Contacts

Coupled Investigation of Contact Potential and Microstructure Evolution of Ultra-Thin AlOx for Crystalline Si Passivation

Thermal Stability of Titanium Contacts to MoS2

Contact Engineering of Molybdenum Ditelluride Field Effect Transistors Through Rapid Thermal Annealing

Enhanced Electrical Properties Of Lithography-Free Fabricated Mos2 Field Effect Transistors With Chromium Contacts

Study on the Thermal Stability of Molybdenum Oxide‐Passivated Silicon Solar Cells

Enhanced Organic Thin-Film Transistor Stability by Preventing MoO 3 Diffusion with Metal/MoO 3 /Organic Multilayered Interface Source-Drain Contact

Investigation of metal contacts to Nb-1.0wt.%-doped SrTiO3

Titanium Contacts to MoS2 with Interfacial Oxide: Interface Chemistry and Thermal Transport

The Optimization of Contact Interface Between Metal/mos2 FETs by Oxygen Plasma Treatment

Transport Properties Of Moo3 Contacted Few-Layer Mos2 N-Type Field-Effect Transistor

Amorphous Semi-Insulating Al-doped In2O3 Growth by Atomic Layer Deposition for Thin-Film Transistors

Transport Properties of MoO&lt;sub&gt;3&lt;/sub&gt; Contacted Few-Layer MoS&lt;sub&gt;2&lt;/sub&gt; N-type Field-Effect Transistor

Metal-insulator transition on SrTiO$_{3}$ surface induced by ionic-bombardment