Abstract:Despite the extensive ongoing research on MoS2 field effect transistors (FETs), the key role of device processing conditions in the chemistry involved at the metal-to-MoS2 interface and their influence on the electrical performance are often overlooked. In addition, the majority of reports on MoS2 contacts are based on exfoliated MoS2, whereas synthetic films are even more susceptible to the changes made in device processing conditions. In this paper, working FETs with atomic layer deposition (ALD)-based MoS2 films and Ti/Au contacts are demonstrated, using current–voltage (I–V) characterization. In pursuit of optimizing the contacts, high-vacuum thermal annealing as well as O2/Ar plasma cleaning treatments are introduced, and their influence on the electrical performance is studied. The electrical findings are linked to the interface chemistry through X-ray photoelectron spectroscopy (XPS) and scanning transmission electron microscopy (STEM) analyses. XPS evaluation reveals that the concentration of organic residues on the MoS2 surface, as a result of resist usage during the device processing, is significant. Removal of these contaminations with O2/Ar plasma changes the MoS2 chemical state and enhances the MoS2 electrical properties. Based on the STEM analysis, the observed progress in the device electrical characteristics could also be associated with the formation of a continuous TiSx layer at the Ti-to-MoS2 interface. Scaling down the Ti interlayer thickness and replacing it with Cr is found to be beneficial as well, leading to further device performance advancements. Our findings are of value for attaining optimal contacts to synthetic MoS2 films.This article has not yet been cited by other publications.

Titanium Contacts to MoS2 with Interfacial Oxide: Interface Chemistry and Thermal Transport

Thermal Stability of Titanium Contacts to MoS2

Enhanced Thermal Stability and Reduced Specific Contact Resistivity in Titanium-Based Ohmic Contact with an Ultra-Thin Molybdenum Interlayer

An Inside Look at the Ti-MoS2 Contact in Ultra-thin Field Effect Transistor with Atomic Resolution

Electron transport across a metal/MoS$_2$ interface: dependence on contact area and binding distance

Influence of Metal-Mos2 Interface on MoS2 Transistor Performance: Comparison of Ag and Ti Contacts.

Evolution of the SrTiO3-MoO3 Interface Electronic Structure: an in Situ Photoelectron Spectroscopy Study.

Two-step Chemical Vapor Deposition Synthesis of NiTe2-MoS2 Vertical Junctions with Improved MoS2 Transistor Performance.

Comparison of contact metals evaporated onto monolayer molybdenum disulfide

On the Contact Optimization of ALD-Based MoS 2 FETs: Correlation of Processing Conditions and Interface Chemistry with Device Electrical Performance

Conformal interface of monolayer molybdenum diselenide/disulfide and dielectric substrate with improved thermal dissipation

Thermal Conductance of Interfaces with Amorphous SiO2 Measured by Time-Resolved Magneto-Optic Kerr-effect Thermometry

Low-resistivity Ohmic contacts of Ti/Al on few-layered 1T'-MoTe2/2H-MoTe2 heterojunctions grown by chemical vapor deposition

Low Contact Resistance on Monolayer MoS2 Field-Effect Transistors Achieved by CMOS-Compatible Metal Contacts

Titanium Contacts to Graphene: Process-Induced Variability in Electronic and Thermal Transport

Interface transition from Ohmic to Schottky contact in Ti3X2/MoS2 (X= B, C, N): Insights from first-principles

Contact-induced doping in aluminum-contacted molybdenum disulfide

An Investigation of the TiOx–SiO2/Mo(1 1 2) Interface

Influence of MoS2-metal Interface on Charge Injection: a Comparison Between Various Metal Contacts.

Interfacial Thermal Transport in Monolayer MoS2‐ and Graphene‐Based Devices

Uncovering the Effects of Metal Contacts on Monolayer MoS2