Abstract:In this paper, the operation mechanism of trench termination is investigated through 2-D numeric simulation on Silvaco. It is found that in trench termination, the electric field is terminated by the accumulated holes at the outer trench sidewall. In order to ensure a high termination breakdown voltage, the trench is refilled with a combination of SiO<sub>2</sub> and polyimide (PI). Through various 2-D numerical simulations, the impact of structural parameters on breakdown voltage has been discussed, namely, trench depth (TD), trench width (TW), and sidewall tilt angle. The 3-D simulations are also conducted to investigate the effect of round corner radius on the device breakdown voltage and electric field in the dielectrics. Based on these results, the trench termination is designed and then fabricated along with a p-i-n diode. The measurement results show that a $14~mu text{m}$ wide trench is sufficient to terminate a voltage of 1750V (>96% of the ideal planar breakdown). Comparing with conventional field limiting rings junction termination extension (FLR/JTE) technology, this trench termination can significantly reduce the termination length by a factor of 4. As a result, the area efficiency is largely improved from 62% to around 90% for a 2A device conducting at 1000 A/cm<sup>2</sup>. These results indicate that the SiC device price can be substantially lowered with such an area-efficient trench termination technology. Furthermore, the 168-h high-temperature reverse bias (HTRB) test under 1200 V and 175 °C shows the potential of this trench termination for long-term reliable operation. Finally, unclamped inductive switching (UIS) tests have been conducted on fabricated devices. Compared to commercial SiC junction barrier Schottky diodes with FLR, fabricated p-i-n diodes with trench termination -how significant higher avalanche capability.

Influence of Lateral Straggling of Implated Aluminum Ions on High Voltage 4H-Sic Device Edge Termination Design

An Effective High-Voltage Termination for Sic Planar Pn Junctions for Use in High-Voltage Devices and Uv Detectors

Design and Characterization of Area-Efficient Trench Termination for 4H-SiC Devices

Electrostatic Modulation of the Lateral Carrier Density Profile in Field Effect Devices with Nonlinear Dielectrics

Hybrid Termination with Wide Trench for 4H-Sic Super-Junction Devices

Analysis of trench termination in 4H-nSiC based power devices

Discrimination of Dislocation in Highly Doped N-Type 4H-Sic by Combining Electrochemical Reaction and Molten Alkali Etching

Termination Design of 6.5kV SiC MOSFET with Epitaxial Current Spreading Layer

Investigation of Lateral Spreading Current in the 4H-Sic Schottky Barrier Diode Chip

High-k Dielectric Assisted Trench Termination of the 4H-SiC Super Junction Device for Improved Avalanche Capability

A Multiscale Simulation on Aluminum Ion Implantation-Induced Defects in 4H-SiC MOSFETs

A Rigorous Analysis of Specific ON-resistance for 4H-Sic Superjunction Devices

Design Criteria of High-Voltage Lateral RESURF JFETs on 4H-Sic

Influence of a thin amorphous surface layer on de-channeling during aluminum implantation at different temperatures into 4H-SiC

Charge Imbalance Tolerance of 4H-SiC Superjunction Devices Featuring Breakdown Path Variation

Modeling and Optimal Device Design for 4H-Sic Super-Junction Devices

A Study of Oxide Reliability Limitation on Different Field Plate Based Termination Techniques for SiC Power Devices

A New Edge Termination Technique for High-Voltage Devices in 4H-Sic–multiple-floating-zone Junction Termination Extension

Atomistic Mechanism of 4 H - Si C / Si O 2 Interface Carrier-Trapping Effects on Breakdown-Voltage Degradation in Power Devices

Analysis of Dislocation Structures in 4H-Sic by Synchrotron X-ray Topography

Simulation Study of Single Event Effects in the SiC LDMOS with a Step Compound Drift Region