Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

AN ELECTRONICALLY TUNABLE DUAL-BAND FILTERING POWER DIVIDER WITH TUNING DIODES SHARING TECHNIQUE

Tunable Dual-Mode Filtering Power Divider with Harmonic Suppression

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

Design of Dual‐band Filtering Power Dividers with Designable Port‐to‐port Isolation Network

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Dual-Band Dual-Mode Dielectric Resonator Filtering Power Divider With Flexible Output Phase Difference and Power Split Ratio

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Frequency-Tunable Nonreciprocal SIW Filtering Power Divider Using a Common Resonator With Mixed Static and Time-Modulated Degenerate Modes

A Synthesis Theory of Stripline Dual-Band Filtering Power Divider with Controllable Full-frequency Isolation

Dual-Band Bandpass Filter and Filtering Power Divider with Ultra-Wide Upper Stopband Using Hybrid Microstrip/DGS Dual-Resonance Cells

Design Method of Dual-Band Wilkinson Power Divider with Designable Length and High Design Freedom

Balanced-to-unbalanced Filtering Power Divider with Compact Size and High Common-Mode Suppression

A Tunable Vector-Sum Filtering Power Divider With Continuously Tuned Frequency and Arbitrary Output Phase Difference

Dual-band power dividers using substrate integrated circular cavity

A 3.4–7.4-Ghz Filtering Power Divider with Wide Stopband and Low Radiation Loss Using Triple-Mode Hybrid Microstrip/SIDGS Resonator

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

High-performance filtering power divider with multiple transmission zeros