Abstract:In this article, a class of <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2^{n}$ </tex-math></inline-formula> -way wideband filtering power dividers (FPDs) is presented and designed with a wide isolation band. It consists of ( <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$2^{n}-1$ </tex-math></inline-formula> ) two-way power-dividing units and <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$n$ </tex-math></inline-formula> three-line coupled lines. The basic two-way power divider is achieved by replacing a simple isolation resistor of the conventional Wilkinson power divider with a modified isolation network, so as to improve the bandwidth of better-than-20-dB isolation band from 40% to 120%. The modified isolation network is composed of one quarter-wavelength coupled line, two quarter-wavelength transmission lines, and one resistor. The three-line coupled line is introduced at each output of the proposed FPD to improve its frequency selectivity and passband bandwidth. Furthermore, after placing one additional isolation resistor on each three-line coupled line, the number of output ports in the proposed power divider could be doubled without introducing more two-way power-dividing units. Finally, a prototype two-way and two prototype four-way wideband FPDs with different occupied sizes are designed and fabricated. The feasibility of the proposed design method is verified by the good agreement between the simulated and measured results.

An Optimization Design Method for Dual-Band and Wideband Patch Filtering Power Dividers

Bandwidth-Related Optimization in High-Speed Frequency Dividers Using Sige Technology

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

Design of Dual‐band Filtering Power Dividers with Designable Port‐to‐port Isolation Network

Design of Filtering Power Divider with High Frequency Selectivity

Wideband Microstrip Filtering Power Divider Designed by Direct Synthesis Technique (DST)

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

Design Method of Dual-Band Wilkinson Power Divider with Designable Length and High Design Freedom

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Design of Wideband Filtering Power Dividers with Harmonic Suppression Based on the Parallel-Coupled Line Structures

Millimeter Wave Dual Wideband Filtering Power Divider Using Groove Gap Waveguide and Spoof Surface Plasmon Polariton

A Dual-Band Balanced-To-Balanced Power Divider With High Selectivity And Wide Stopband

Design of <i>n</i>-Way Wideband Filtering Power Dividers With Good Port-Port Isolation

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

Broadband Filtering Power Dividers Using Simple Three-Line Coupled Structures

2<italic><sup>n</sup></italic>-Way Wideband Filtering Power Dividers With Good Isolation Enhanced by a Modified Isolation Network

Wideband Filtering Power Divider with Deep and Wide Stopband

A Design Approach for Dual-Band Wilkinson Power Divider with Two Pairs of Coupled-Line Sections