Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

A Tunable Balanced Dual‐band BPF with Quasi‐independently Controlled Center Frequency and Bandwidth

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Balanced tri- and quad-band BPFs based on SIR with improved passbands selectivity

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

An Extended Doublet Substrate Integrated Waveguide (SIW) Bandpass Filter with a Complementary Split Ring Resonator (CSRR)

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

A Balanced Dual-Band BPF Based on C-CSRR with Improved Passband Selectivity

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators

Compact Dual-Band Dual-Mode SIW Balanced BPF With Intrinsic Common-Mode Suppression

Novel Balanced Single/Dual-band Bandpass Filters Based on Circular Patch Resonator

High‐performance balanced dual‐band bandpass filter with controllable bandwidth and frequency ratio

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Compact dual‐band balanced bandpass filter with controllable passbands using coplanar waveguide spiral cross resonators

High selectivity and common-mode suppression balanced bandpass filter with TM dual-mode SIW cavity

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

Ultra-Wideband Band-Pass Filter with Dual Narrow Notched Bands Based on Dual-Mode Stepped Impedance Resonator