Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

DUAL-MODE BPF WITH FOUR TRANSMISSION ZEROS USING S-L COUPLING STRUCTURE WITH QUADRATIC FUNCTION COUPLING COEFFICIENT

The design and test of dual/triple-mode bandpass filter based on temporal coupled-mode theory

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Novel microstrip bandpass filter with multiple transmission zeros and wide stopband

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

High-Selective Bandpass Filters Based on New Dual-Mode Rectangular Strip Patch Resonators

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

A compact dual‐band bandpass filter based on coupled stub‐loaded square ring resonators by using transversal signal‐interaction concepts

SECOND-ORDER MIXED COUPLING FILTER WITH ONE CONTROLLABLE TRANSMISSION ZERO USING MULTILAYER SUBSTRATE INTEGRATED WAVEGUIDE

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Sharp-rejection dual ultra-wideband bandpass filter using sextuple mode resonator

A Compact Quad-Band Bandpass Filter Based on Defected Microstrip Structure

Compact Tunable Balanced Bandpass Filter with Constant Bandwidth Based on Magnetically Coupled Resonators

Design of On-Chip Dual-Band Bandpass Filter Using Lumped Elements in LTCC Technology

Compact and high selectivity dual-mode microstrip BPF with frequency-dependent source–load coupling

Design of a quad-band bandpass filter based on 13-mode resonator

Compact Quad-Band BPF Using Quad-Mode Stub Loaded Resonators

Compact Microstrip Balanced Bandpass Filter with Adjustable Transmission Zeros