Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

A Novel Dual-Band Filtering Power Divider with U-section Loaded Resonator

Design of Compact Dual-Mode Dual-Band Filtering Power Divider with High Selectivity

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Dual-Band Dual-Mode Dielectric Resonator Filtering Power Divider With Flexible Output Phase Difference and Power Split Ratio

Design of Dual‐band Filtering Power Dividers with Designable Port‐to‐port Isolation Network

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Compact Filtering Power Divider with High Frequency Selectivity and Wide Stopband Using Embedded Dual-Mode Resonator

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Novel Filtering Power Divider with External Isolation Resistors

A Wideband Power Divider with Bandpass Response

Design of A Wideband Unequal Filtering Power Divider Using Ring Resonator

Novel High-Isolation Power Divider Integrated Filtering Response

Novel Design of Dual-Band Unequal Wilkinson Power Divider

Miniaturized Tri-Band Filtering-Response Power Divider with Short- and Open-Stub-Loaded Resonators

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity

Synthesis Design of Dual-Band Filtering Power Dividers Based on E-Shape Resonators

Single- and dual-band filtering-response power dividers embedded SIW filter with improved output isolation

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.

Dual-band bandpass filter using centrally coupled resonators (CCRs)

A Novel Filtering Power Divider with Improved Frequency Selectivity and Out-of-band Performance