Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Compact dual-mode dual-band balun filter using double-sided parallel-strip line

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of compact dual-band quasi-elliptic filter with high selectivity and wide stopband rejection

Compact Rat-Race Coupler with Double-Sided Parallel-Strip Line (DSPSL) for Dual-Band Arbitrary Power Divisions

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

Design of a Substrate Integrated Waveguide Balun Filter Based on Three-Port Coupled-Resonator Circuit Model

Extended Doublet Bandpass Filters Implemented with Microstrip Resonator and Full-/Half-Mode Substrate Integrated Cavities

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

A Novel Dual-Band H-Shaped Branch-Line Coupler With Stepped-Impedance Stubs

Planar Compact Dual-Band Balun with Flexible Frequency Ratios

Dual-Mode Dual-Band DR Balun Filter Using Suspended Stripline Feeding Structure

Compact Superconducting Single- and Dual-Band Filter Design Using Multimode Stepped-Impedance Resonator

Compact Dual-band Bandpass Filter Using Coupled Lines Multimode Resonator

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

A Compact Dual-Band Bandpass Superconducting Filter Using Microstrip/CPW Spiral Resonators

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros