Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Miniaturized Tri-Band Filtering-Response Power Divider with Short- and Open-Stub-Loaded Resonators

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Compact Triple-Band Power Divider Integrated Bandpass-Filtering Response Using Short-Circuited SIRs

Compact dual-band bandpass filter using asymmetrical dual stub-loaded open-loops

Miniaturization of Rat-Race Coupler With Dual-Band Arbitrary Power Divisions Based on Stepped-Impedance Double-Sided Parallel-Strip Line

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity

A Tri-Band Filter Using Tri-Mode Stub-Loaded Resonators (Slrs)

Compact Microstrip Tri-Section Bandpass Filters with Mixed Couplings

A tri-band Wilkinson power divider using extended T-shaped stubs

Miniaturized Dual-Band Bandpass Filter Using &#x03bb;/2 Spiral-Resonator and Loaded Open-Stub

A New Wideband Filtering Power Divider Based on Rectangle Patch Resonator with Compact Size

Novel High-Isolation Power Divider Integrated Filtering Response

Novel design of compact quad‐band divider using stepped impedance coupled lines

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

A Novel Dual-Band Filtering Power Divider with U-section Loaded Resonator

Synthesis of miniaturized wideband four‐way filtering power divider consisting of unequal‐width three‐coupled‐lines

Single- and dual-band filtering-response power dividers embedded SIW filter with improved output isolation

Dual-band Wilkinson Power Divider Based on SS-CML

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation