Abstract:Label-free biosensors, combined with miniaturized micro-electromechanical sensory platforms, offer an attractive solution for real-time and facile monitoring of biomolecules due to their high sensitivity and selectivity without the need for specifically labeling. Resonators have been acknowledged as an efficient technology for measuring biomolecular binding events including those involving nucleic acid and antibody. Among these, capacitive micromachined ultrasonic transducers (CMUTs) have emerged as a promising candidate for biosensing. However, their usage is often limited by the requirement for high voltage supply and continuous frequency tracking, which can result in significant parasitic effects and measurement errors. In this brief, we present a novel front-end interface circuit for a CMUTs-based biosensor. The circuit, fabricated using TSMC 0.18- $\mu \text{m}$ Bipolar-CMOS-DMOS (BCD) technology, incorporates an on-chip high voltage charge pump and feedback frequency monitoring. The CMUTs array features $20\times20$ circular cells, fabricated using a low-temperature direct bonding technology, with an experimental parallel-resonant frequency of 1.724 MHz and a high quality factor of up to 40.9. To fit the measured electrical characteristics, a five-element equivalent lumped element model is proposed. The high voltage charge pump provides an output voltage of ~20 V, while the feedback oscillator has a ms-level start-up time and a total power dissipation of 3.8 mW. The proposed front-end interface is designed to function as a stand-alone chip for CMUTs-based resonant biodetection.

An Oscillator-Based Cmos Magneto-Sensitive Biosensor with In-Situ Switched Capacitor Calibration Scheme

An Oscillator-Based CMOS Magneto-Sensitive Biosensor with a Low Noise and Low Temperature Coefficient LDO Regulator

A CMOS Magnetic Sensor Integrated Circuits Based on the Synchronized Sampling Function of Sector MAGFET

Design of CMOS magnetic sensor integrated circuit

A CMOS Magnetic Sensor Based on Synchronous Sampling Function

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

Cmos Magnetic Sensor Integrated Circuit with Sectorial Magfet

A CMOS Sectorial Split-Drain Magnetic Sensor IC

An Oscillator-Based CMOS Magnetosensitive Microarray Biochip with On-Chip Inductor Optimization Methodology

A Front-End CMOS Interface Circuit with High Voltage Charge Pump and Oscillator for Capacitive Micromachined Ultrasonic Transducers.

A CMOS Pixelated Nanocapacitor Biosensor Platform for High-Frequency Impedance Spectroscopy and Imaging

An Offset-Compensated Switched-Capacitor Interface Circuit for Closed-Loop Mems Capacitive Accelerometer

Biosensor Based on Magnetostrictive Microcantilever

An Integrated Low 1/f Noise and High-Sensitivity CMOS Instrumentation Amplifier for TMR Sensors

Magnetostrictive Microcantilever As Micro-Biosensor Platform

A low-noise switched-capacitor interface for a capacitive micro-accelerometer

High-performance capacitive readout circuit for MEMS gyroscope

An Interrogating Circuit and Device for Magnetostrictive Biosensors

Fully Integrated Low-Noise Readout Circuit with Automatic Offset Cancellation Loop for Capacitive Microsensors

Cmos Interface Circuitry For A Closed-Loop Capacitive Mems Accelerometer

A Closed-Loop Sigma Delta Modulator For Micromechanical Capacitive Sensors