Abstract:We present a bulk micromachined in-plane capacitive accelerometer fabricated with an improved process flow, by etching only one-fifth of the wafer thickness at the back of the silicon while forming the bar-structure electrode for the sensing capacitor. The improved flow greatly lowers the footing effect during deep reactive ion etching (DRIE), and increases the proof mass by 54% compared to the traditional way, resulting in both improved device quality and a higher yield rate. Acceleration in the X direction is sensed capacitively by varying the overlapped area of a differential capacitor pair, which eliminates the nonlinear behavior by fixing the parallel-plate gap. The damping coefficient of the sensing motion is low due to the slide-film damping. A large proof mass is made using DRIE, which also ensures that dimensions of the spring beams in the Y and Z directions can be made large to lower cross axis coupling and increase the pull-in voltage. The theoretical Brownian noise floor is 0.47 µg/Hz1/2 at room temperature and atmospheric pressure. The tested frequency response of a prototype complies with the low damping design scheme. Output data for input acceleration from −1 g to 1 g are recorded by a digital multimeter and show very good linearity. The tested random bias of the prototype is 130 µg at an averaging time of around 6 s.

A low-noise switched-capacitor interface for a capacitive micro-accelerometer

A Low-Noise Closed-Loop Interface For High-G Capacitive Micro-Accelerometer

A Low-Power Digital Processing Circuit for Capacitive Accelerometer

A low-noise fully-differential open-loop interface for high-G capacitive micro-accelerometers with 112.2 dB dynamic range

A High-Voltage Closed-Loop SC Interface for a ± 50 G Capacitive Micro-Accelerometer with 112.4 Db Dynamic Range

A low-noise CMOS interface circuit for closed-loop accelerometer

A Low Noise Sigma-Delta Microaccelerometer Interface Circuit

A Low-Noise High-G Closed-Loop Capacitive Accelerometer Using Dc-Blocking Technique For Reduction Of Power Dissipation

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

Low Noise Interface ASIC of Capacitive MEMS Accelerometer

A Low-Noise CMOS Interface ASIC for Capacitive MEMS Accelerometer

A Low-Noise Low-Offset CMOS Readout Circuit for MEMS Capacitive Accelerometers

Noise Behaviors of a Closed-Loop Micro-Electromechanical System Capacitive Accelerometer

A Closed-Loop Switched-Capacitor Interface for High-Quality Microaccelerometer

Interface circuit with zero compensation function for capacitive microaccelerometers

Noise analysis and characterization of a full differential CMOS interface circuit for capacitive closed-loop micro-accelerometer

A Closed-Loop $\sigma\delta$ Interface for a High-Q Micromechanical Capacitive Accelerometer with 200 Ng/ $ \surd$ Hz Input Noise Density

Interface Circuit for Capacitive Microaccelerometer

An Offset-Compensated Switched-Capacitor Interface Circuit for Closed-Loop Mems Capacitive Accelerometer

Design of Interface Circuit of Closed-Loop Accelerometer with Self-Test Function

CMOS interface circuit for closed-loop accelerometer