Abstract:Plasma polishing is a relatively new technique successfully applied for polishing optical materials due to its numerous advantages. It includes the high quality of the polished surface, reduced surface and sub-surface defects, high processing speed, etc. This paper investigates surface finish on fused silica using two processes, i.e., medium pressure plasma process and wet chemical etching. The experimental result shows that at a 20 mbar chamber pressure and 80 W radio frequency power, the surface finish of coarse machined and lapped fused silica substrate is better than 5 and 10 mbar. The experiments are also conducted using wet chemical etching on coarse machined and lapped polished fused silica substrates using a mixed hydrofluoric and sulfuric acid solution. However, using wet chemical etching, the percentage increase of surface roughness achieved on lapped and coarse machined surfaces is higher than in the plasma process . The percentage increase in surface roughness is 84.8 % and 98.81 % on coarse surfaces and 69.23 % and 892.3 % on lapped surfaces upto 30 μm material depth using plasma process (at 20 mbar pressure) and wet chemical etching, respectively. The surface microstructure of fused silica before and after processing is investigated using field-emission scanning electron microscopy. The result reveals that plasma polishing significantly reduced the micro-cracks and damaged layers. Energy dispersive X-ray results show the presence of elements fluorine, silicon, oxygen, and carbon on the processed surface, showing evidence of plasma reaction. Moreover, an additional element, i.e., sulfur, also appears on the processed surfaces from the solution during wet chemical etching. The sharp diffraction peaks have not been observed in X-ray diffraction patterns, indicating that the material is amorphous fused silica.

Etching a Surface-Relief Grating into Fused Silica with Inductively Coupled Plasma Technology

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Etching Quartz with Inductively Coupled Plasma Etching Equipment

Phase Gratings Made with Inductively Coupled Plasma Technology

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Deep groove etching for partial reflectors in InP-based monolithically integrated photonic devices

Surface Grating Fabrication by Inductively Coupled Plasma Dry Etching for InP-Based Photonic Integrated Circuits

A study on the etching characteristics of atmospheric pressure plasma for single-crystal silicon wafer

Fabrication of Slanted Grating Utilizing Reaction Ion Beam Etching: The Role of CHF<inf>3</inf> and O<inf>2</inf> Etching Atmosphere

Room Temperature Dry Etching of INP-Based Semiconductors for Optoelectronic Device Fabrication Using Inductively Coupled Plasma

Study on ICP Dry Etching Technology for Nanostructure Photonic Device Fabrication

Deep InP gratings for opto-electronic devices etched by Cl 2/CH 4/Ar inductively coupled plasma

NOVEL ETCHING TECHNOLOGY OF INP BY INDUCTIVELY COUPLED PLASMA1

Development and Performance Evolution of Medium-Pressure He/SF6/O2-Based Plasma and Wet Chemical Etching Process for Surface Modification of Fused Silica

A process study of electron beam nano-lithography and deep etching with an ICP system

Inductively Coupled Plasma etching of amorphous silicon nanostructures over nanotopography using C4F8/SF6 chemistry

Vertical and Smooth, Etching of Inp by Cl-2/Ch4/Ar Inductively Coupled Plasma at Room Temperature

Design and development of medium-pressure plasma process for optical substrate finishing: A comparative study with wet chemical etching

Microscale pattern etch of 4H–SiC by inductively coupled plasma

Dual-control of incubation effect for efficiently fabricating surface structures in fused silica