Abstract:A simple method for the fabrication of submicrometer InP pillars with large surface area coverage has been developed based on a combination of colloidal lithography and inductively coupled plasma (ICP) etching technique using Cl(2)/H(2)/CH(4)/Ar chemistry. Pillars with different sizes could be fabricated by using colloidal SiO(2) particles with different sizes dispersed on the sample serving as masks. Pillars with lateral diameters as small as 60 nm and aspect ratios as high as 10: 1 have been obtained. The effects of etch parameters such as radio-frequency power, ICP power, and etching time on pillar fabrication are investigated. By a suitable choice of etch parameters and utilizing erosion of colloidal (mask) SiO(2) particle during etching, the height of the pillars as well as their shape can be modified from nearly cylindrical to conical shapes. Such a control on the shape of the structures in addition to the large surface coverage could be useful for applications in photovoltaics and for the fabrication of photonic crystals. For instance, continuous grading of the refractive index can be obtained for surfaces covered with conical pillars, which can be used as antireflecting surfaces in solar cells or for light extraction in light emitting diodes. (C) 2010 The Electrochemical Society. [DOI:10.1149/1.3464764] All rights reserved.

Deep groove etching for partial reflectors in InP-based monolithically integrated photonic devices

Deep Groove Etching for Partial Reflectors in InP-based Monolithically Integrated Photonic Devices

Dip-In Photoresist for Photoinhibited Two-Photon Lithography to Realize High-Precision Direct Laser Writing on Wafer.

Reactive ion beam etching for diffractive optical elements

Deep InP gratings for opto-electronic devices etched by Cl 2/CH 4/Ar inductively coupled plasma

The study and optimization of ICP deep etching at a low-temperature for InP solid-immersion metalens fabrication

Deep InP Gratings for Opto-Electronic Devices Etched by Cl <sub>2</sub> /CH <sub>4</sub> /Ar Inductively Coupled Plasma

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

Room Temperature Dry Etching of INP-Based Semiconductors for Optoelectronic Device Fabrication Using Inductively Coupled Plasma

Surface Grating Fabrication by Inductively Coupled Plasma Dry Etching for InP-Based Photonic Integrated Circuits

NOVEL ETCHING TECHNOLOGY OF INP BY INDUCTIVELY COUPLED PLASMA1

Small-feature-size Etching of InP/InGaAsP by Inductively Coupled Plasma at Ultra-Low Pressure

A process study of electron beam nano-lithography and deep etching with an ICP system

Vertical and Smooth, Etching of Inp by Cl-2/Ch4/Ar Inductively Coupled Plasma at Room Temperature

Study on ICP Dry Etching Technology for Nanostructure Photonic Device Fabrication

Dry etching of epitaxial InGaAs/InAlAs/InAlGaAs structures for fabrication of photonic integrated circuits

Phase Gratings Made with Inductively Coupled Plasma Technology

Fabrication and Characterization of InP/air-gap Structure

Narrow Linewidth Single-Mode Slotted Fabry–Pérot Laser Using Deep Etched Trenches

A Universal Approach to High-Index-Contrast Flexible Integrated Photonics

Deep reactive ion etching of cylindrical nanopores in silicon for photonic crystals