Abstract:Recent advances in topological one-dimensional photonic crystal concepts have enabled the development of robust light-emitting devices by incorporating a topological interface state (TIS) at the cavity center. In this study, we theoretically and experimentally demonstrate a one-dimensional TIS-extended photonic crystal (1D-TISE-PC) structure. By integrating a linearly dispersive zero-index one-dimensional photonic crystal structure with a four-phase shift sampled grating, photons propagate along the cavity without phase differences, enhancing the robustness to material variations and extending the TIS. Our findings indicate that extending the TIS promotes a more uniform photon distribution along the laser cavity and mitigates the spatial hole burning (SHB) effect. We fabricated and characterized a 1550 nm sidewall 1D-TISE-PC semiconductor laser, achieving stable single-mode operation across a wide current range from 60 to 420 mA, with a side-mode suppression ratio of 50 dB. The 1D-TISE-PC structure exhibited a linewidth narrowing effect to approximately 150 kHz Lorentzian linewidth. Utilizing reconstruction equivalent-chirp technology for the 4PS sampled grating enabled precise wavelength control in 1D-TISE-PC laser arrays, achieving a wavelength spacing of 0.796 nm +- 0.003 nm. We show that the TIS still exists in the TISE cavity and topological protection is preserved. Its mode extension characteristics mitigate the SHB so narrows the linewidth. We argue that the design simplicity and improvement of the fabrication tolerance make this architecture suitable for high-power and narrow-linewidth semiconductor lasers development.

Narrow Linewidth Single-Mode Slotted Fabry–Pérot Laser Using Deep Etched Trenches

Single-Mode Narrow Linewidth Three-Section Coupled-Cavity Laser With Deeply Etched Trenches

Single-mode and Wavelength Tunable Lasers Based on Deep-Submicron Slots Fabricated by Standard UV-lithography

Electro-optic tuning of a single-frequency ultranarrow linewidth microdisk laser

Coherent mode-combined ultra-narrow-linewidth single-mode micro-disk laser

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

InGaAsP/InP Based Q-modulated Slotted Fabry-Perot Laser Employing Lossy Half-Wave Trenches

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

Narrow-Linewidth GaN-on-Si Laser Diode with Slot Gratings

GaAs/AlGaAs tunable laser using Fabry-Perot filters based on half-wave coupled lossy deep etched trenches

Narrow Linewidth Tunable V-cavity Laser Using Self-Injection Method

Tunable V-Coupled-Cavity Semiconductor Laser Monolithically Integrated with Monitoring Photodiodes Using Deeply Etched Reflective Trenches

Q-modulated Semiconductor Laser Using Deep Etched Subwavelength Trenches

Dual Wavelength Slot Coupled Fabry-Perot Semiconductor Laser

Narrow-linewidth Self-Injection Locked Diode Laser with a High-Q Fiber Fabry-Perot Resonator

Narrow Linewidth Laser Based on Extended Topological Interface States in One-Dimensional Photonic Crystals

Narrow linewidth laser based on a sidewall grating active distributed Bragg reflector

Ultra-narrow Linewidth Laser Based on Stimulated Brillouin Scattering

Tunable Self-Injected Fabry-Perot Laser Diode Coupled to an External High-Q Si3N4/SiO2 Micro-Ring Resonator

Narrow Linewidth Semiconductor Laser Diodes

Design and Analysis of a Narrow Linewidth Laser Based on a Triple Euler Gradient Resonant Ring