Abstract:A simple method for the fabrication of submicrometer InP pillars with large surface area coverage has been developed based on a combination of colloidal lithography and inductively coupled plasma (ICP) etching technique using Cl(2)/H(2)/CH(4)/Ar chemistry. Pillars with different sizes could be fabricated by using colloidal SiO(2) particles with different sizes dispersed on the sample serving as masks. Pillars with lateral diameters as small as 60 nm and aspect ratios as high as 10: 1 have been obtained. The effects of etch parameters such as radio-frequency power, ICP power, and etching time on pillar fabrication are investigated. By a suitable choice of etch parameters and utilizing erosion of colloidal (mask) SiO(2) particle during etching, the height of the pillars as well as their shape can be modified from nearly cylindrical to conical shapes. Such a control on the shape of the structures in addition to the large surface coverage could be useful for applications in photovoltaics and for the fabrication of photonic crystals. For instance, continuous grading of the refractive index can be obtained for surfaces covered with conical pillars, which can be used as antireflecting surfaces in solar cells or for light extraction in light emitting diodes. (C) 2010 The Electrochemical Society. [DOI:10.1149/1.3464764] All rights reserved.

Room Temperature Dry Etching of INP-Based Semiconductors for Optoelectronic Device Fabrication Using Inductively Coupled Plasma

Room temperature inductively coupled plasma etching of InP-based semiconductors using Cl2/N2 and Cl2/N 2/Ar mixtures

NOVEL ETCHING TECHNOLOGY OF INP BY INDUCTIVELY COUPLED PLASMA1

Study on ICP Dry Etching Technology for Nanostructure Photonic Device Fabrication

Deep groove etching for partial reflectors in InP-based monolithically integrated photonic devices

Isotropic Etch for SiO2 Microcantilever Release with ICP System

Vertical and Smooth, Etching of Inp by Cl-2/Ch4/Ar Inductively Coupled Plasma at Room Temperature

The study and optimization of ICP deep etching at a low-temperature for InP solid-immersion metalens fabrication

Fabrication of Submicrometer Inp Pillars by Colloidal Lithography and Dry Etching

Deep InP gratings for opto-electronic devices etched by Cl 2/CH 4/Ar inductively coupled plasma

Surface Grating Fabrication by Inductively Coupled Plasma Dry Etching for InP-Based Photonic Integrated Circuits

Smooth and Vertical Etching of GaAs/GaInP/AlGaInP Using Inductively Coupled Cl2/BCl3/CH4 Plasma

Phase Gratings Made with Inductively Coupled Plasma Technology

Deep InP Gratings for Opto-Electronic Devices Etched by Cl <sub>2</sub> /CH <sub>4</sub> /Ar Inductively Coupled Plasma

Fabrication and Characterization of InP/air-gap Structure

Etching Quartz with Inductively Coupled Plasma Etching Equipment

Inductively Coupled Plasma-Reactive Ion Etching Of Insb Using Ch4/H-2/Ar Plasma

Fabrication and performance of indium oxide based transparent thin film transistors

Dry etching of epitaxial InGaAs/InAlAs/InAlGaAs structures for fabrication of photonic integrated circuits

Inductively coupled plasma-reactive ion etching of InSb using CH[sub 4]∕H[sub 2]∕Ar plasma