Abstract:This article reports a novel laser-induced micro-fabrication method and its monitoring system for three-dimensional (3D) microstructures. The mechanism of the method is that a small zone of thermoplastic material melted by laser heating grows in liquid surrounding environment, solidifying into a convex microstructure, such as micro-dot or micro-pillar. A laser diode (808 nm) with maximum power output of 130 mW is used as power source, and a kind of paraffin mixed with stearic acid and paint serves as the thermoplastic material for 3D microstructure formation experiments. A light microscope system consisting of a charge-coupled device (CCD) and a computer is utilized to realize real-time observation of the micro-fabricating process. The distribution of local temperature rise on material surface created by laser irradiation is simulated. The effects of liquid environment on microstructure formation have been theoretically analyzed and experimentally studied. Experiments are further carried out to investigate the relationship between laser spot and fabricated microstructures. The results indicate that the widths of microdots or micro-pillars are mostly determined by the size of focal spot, and their heights increase with the enlargement of laser power density. With this method, a micro-dot array of Chinese characters meaning "China" has been successfully fabricated through computer programming. This method has the advantages of implementing direct, mask-less, real-time and inexpensive 3D microstructure fabrication. Therefore, it would be widely applied in the fields of micro/nano-technology for practical fabrication of different kinds of 3D microstructures. Microsc. Res. Tech. 72:717-722, 2009. (C) 2009 Wiley-Liss, Inc.

Three-dimensional Microfabrication on GaAs Using a Regular Patterns Mold

Three-dimensional micromachining for microsystems by confined etchant layer technique

Metal Microstructure Microfabrication Technique

Chemical Etching Processes at the Dynamic GaAs/Electrolyte Interface in the Electrochemical Direct-Writing Micromachining

Micro-Fabrication and Monitoring of Three-Dimensional Microstructures Based on Laser-Induced Thermoplastic Formation

Fabrication of Submicron Devices on the (011) Cleave Surface of a Cleaved-Edge-overgrowth GaAs/AlGaAs Crystal

CMOS-Compatible Electrochemical Nanoimprint:High Throughput Fabrication of Ordered Microstructures on Semiconductor Wafer by Using a Glassy Carbon Mold

Patterned Microstructure Array Fabrication By Using A Novel Standing Surface Acoustic Wave Device

Fabricating 3D Si nanostructure via a novel Ga+ implantation enabled maskless dry etching process

Etching and Smooth Processing of GaAs Surface Based on the Confined Etchant Layer Technique

Fabrication of Micro Carbon Mold for Glass-Based Micro Hole Array

Fabrication of 2D silicon nano-mold by side etch lift-off method

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

A simple method for producing freestanding 3D microstructures by integrated photomask micromolding

Micro Array Hole Formation in Glass Using Electrochemical Discharge Machining

Fabrication of suspending gan microstructures with combinations of anisotropic and isotropic dry etching techniques

Fabrication of Vitreous Carbon Mold for Glass Moled Microarray

Microfabrication Technology of Three-Dimensional Microdevices and Their Mems Applications

Fabrication of a Metal Micro Mold by Using Pulse Micro Electroforming

Fabricating 3D Metastructures by Simultaneous Modulation of Flexible Resist Stencils and Basal Molds

Three-dimensional micro- and nanometre composite aluminium patterns