Abstract:Due to their low cost, small size, and high-speed performance, biochips are often used in various bio-experiments. Compared with polymer-based biochips, glass-based substrates are less sensitive to heat and organic environments. This study presents a hybrid processing approach that uses laser micromachining (LMM) and precision glass molding (PGM) techniques to mass-produce glass-based biochips. A silicon carbide (SiC) mold with an outside diameter of 20mm was used to hot emboss biochip channels measuring 200μm wide and 185μm deep. This study also identifies the optimal conditions for glass molding when processing soda-lime glass for biochip applications, and discusses the influence of the major processing parameters on biochip channel depth. This study uses the Taguchi method to assess the effects of several molding parameters on larger-the-better performance characteristics. The experiments in this study consider the effects of several molding parameters, such as molding temperature, pressing force, moving speed, temperature holding time, and vacuum environment, to achieve optimum characteristics for biochip channels. Orthogonal array analysis indicates that the optimal process parameters includes a 620°C molding temperature, 1kN pressing force, 5mm/min moving speed, 60s temperature holding time, and a vacuum-free environment. This study also investigates the surface roughness of glass biochip channels.

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

A Simplified Microfabrication Technology For Production Of Glass Microfluidic Chips

Study on a Low-Cost and Fast Fabrication Method of Glass Microfluidic Chips

Numerical Study on Fabricating Rectangle Microchannel in Microfluidic Chips by Glass Molding Process

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

A simple approach to fabricate multi-layer glass microfluidic chips based on laser processing and thermocompression bonding

Glass biochip fabrication by laser micromachining and glass-molding process

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Fabrication Of Microfluidic Chips By An Ultrasonic Micromachining With Wet-Etch Smoothing Method On Glass Substrates

Study on the Manufacture of Microfluidic Chip with Coated Glass

Microcontact Electrochemical Etching Technique for Rapid Fabrication of Glass-Based Microfluidic Chips

Method For Fabrication Of Microfluidic Glass Chips

Low-cost Rapid Prototyping of Glass Microfluidic Devices Using a Micromilling Technique

Fabrication of Glass-Based Microfluidic Devices with Dry Film Photoresists As Pattern Transfer Masks for Wet Etching

Fabrication of all glass microfluidic device with superior chemical and mechanical resistances by glass molding with vitreous carbon mold

Route to one-step microstructure mold fabrication for PDMS microfluidic chip

Rapid Customization of 3d Integrated Microfluidic Chips Via Modular Structure-Based Design

Study on a Practical Fabrication of Glass Microfluidic Chip

Microchannel Fabrication on Glass Materials for Microfluidic Devices

A Facile Method for the Fabrication of Glass-Pdms-glass Sandwich Microfluidic Devices by Sacrificial Molding