Abstract:With the development of analytical instrumentation to minimization,integration and automation,the microfluidic chips,which are more integrated,complex and diversified,have been applied widely on the manufacturing of analytical instrumentation.However,the present photolithography-based microfabrication technology,which is only able to pattern microchannels with simple inside structures,can not follow the rapid development of requirements.For solving the problem,a fabrication method based on the restricting effect of laminar flow is proposed for the micro etching on isotropic substrates.Experiments were conducted inside glass-based microchannels,in which certain etchant was used to form complicated microstructures.The flow parameters’ effects on the aspect ratio,side wall profile and etching rate were revealed by the experiments.The experimental results reveal that the topography of micro structures patterned with the restricted flow etching method is mainly determined by the flowrates of separator and etchant.The computational fluid dynamics（CFD） model on the interface between multiple streams was established for the etching process,and analysis on the causes of various micro topographies was conducted based on the CFD simulation results.The experimental data consisted with the simulation results very well.The investigation depicted in this paper indicate that the flow restricted etching method provides sufficient references for the research and understanding on the mass transport at the liquid-liquid surface in the microchannel and can be used to pattern complex micro structures with high aspect ratios,meantime,it greatly enriches the microfabrication technology for microfluidic chips.

Numerical Study on Fabricating Rectangle Microchannel in Microfluidic Chips by Glass Molding Process

Study The Formation Process Of Cuboid Microprotrusion By Glass Molding Process

Fabricating Microstructures on Glass for Microfluidic Chips by Glass Molding Process

Finite Element Analysis on Non-Isothermal Glass Molding

Numerical Simulation of Glass Bottle Forming Process

FEM Simulation and Analysis on Molding Process of Infrared Aspheric Lenses

Micro Aspheric Glass Lens Molding Process

Fabrication of Microglass Lens Mould by Using Ultraprecision Microgrinding Process

Micro Fabrication of Micro Fluidic Glass Chip Without Clean Room Condition

Micro Etching Method Inside Microchannels

Fabrication of full glass chips with hybrid micro- and nanochannels and their application to protein concentration

Glass Molding for Microstructures

Fabrication of all glass microfluidic device with superior chemical and mechanical resistances by glass molding with vitreous carbon mold

Microchannel Fabrication on Glass Materials for Microfluidic Devices

Bonding of Glass-Based Microfluidic Chips at Low- or Room-Temperature in Routine Laboratory

Fabrication of microchannels by space-selective control of phase separation in glass.

Flow-restricted Etching Method on Isotropic Substrates and Its Mechanism

Glass biochip fabrication by laser micromachining and glass-molding process

Deformation Analysis of the Glass Preform in the Progress of Precision Glass Molding for Fabricating Chalcogenide Glass Diffractive Optics with the Finite Element Method

Machining technologies and structural models of microfluidic devices

Recent advancements in optical microstructure fabrication through glass molding process